Hi, I really appreciate the C++ binding provided. I got the metal-cpp source code from the website at Getting Started. However, I could not find the same for metal-cpp-extensions. Is it not available or do we have to always extract it from the sample code? Thanks.

I am developing a Flutter app for food delivery (a multivendor e-commerce restaurant app). In the vendor app (Android), I successfully implemented a background notification that stays active until the vendor responds with either Accept or Decline. This works fine on Android, but I cannot get the same functionality working on iOS. My requirements: Vendor should receive a background notification. The notification should include action buttons (Accept / Decline). It should remain active until the vendor takes action. My questions: Is this possible to implement in iOS with Flutter? If yes, what is the recommended way (e.g., firebase_messaging, flutter_local_notifications, flutter_foreground_task, or native iOS integration)? Are there any iOS restrictions I should consider compared to Android background services? I built this for Android using firebase_messaging + flutter_foreground_task + flutter_local_notifications. On iOS, I tried setting up firebase_messaging and flutter_local_notifications, but I’m unable to keep the notification persistent with Accept/Decline action buttons. I expected similar behavior to Android, but it seems iOS has more restrictions around background services and notification handling. Dependencies I am using (relevant ones): firebase_core: ^3.8.0 firebase_messaging: ^15.1.5 flutter_local_notifications: ^17.2.2 flutter_foreground_task: ^8.17.0 get: ^4.7.2 shared_preferences: ^2.3.2

開発アプリで通知確認を行うため、UDIDをプロビジョニングプロファイルに追加する必要があります。 iPhoneのUDIDは取得することができたのですが、AppleWatchのUDIDを取得する方法が分かりません。 Xcodeと接続してUDIDを取得しようとしましたが、iPhoneのみ認識がされAppleWatchが認識されていません。 AppleWatchもデベロッパモードをONしなければならないとAppleから返答をもらったが、その方法がわからないのでどなたかご教授お願い致します。

Hi everyone. I’m working on an iOS app that uses Firebase Cloud Messaging (FCM) to send push notifications. I’m encountering an issue when trying to send notifications either from Firebase Functions or directly using the FCM token with the Firebase Admin SDK and REST API. Error Message: FirebaseMessagingError: Auth error from APNS or Web Push Service code: 'messaging/third-party-auth-error' message: 'Auth error from APNS or Web Push Service' What I’ve Set Up: iOS App Registered in Firebase Bundle ID: Kilovative-Designs.ParkAware APNs Key downloaded from Apple Developer Portal Team ID and Key ID correctly entered in Firebase Console Firebase Admin SDK Service Account setup and used for sending Device is successfully receiving FCM tokens Subscribed to topics and calling Messaging.messaging().subscribe(toTopic:) works Using firebase-admin to send FCM messages via sendToDevice or sendToTopic What I’ve Tried: Tested push via firebase-admin in Node.js (got same APNs auth error) Tested with both topic-based and direct token-based push Confirmed the .p8 key is uploaded in Firebase, with correct Key ID and Team ID Tried generating a new APNs Auth Key Firebase Admin SDK is initialized with the correct service account Using Node.js firebase-admin with a known good FCM token, and sending this payload: { notification: { title: "Test Notification", body: "This is a direct FCM test" }, token: "cxleOwi73EhFh9C5_V4hED:APA91bE3W..." } Returns: FirebaseMessagingError: Auth error from APNS or Web Push Service Questions: Are there known conditions under which Firebase throws this error even if the APNs Auth Key is present? Does the Bundle ID need to start with com. in the Apple Developer Portal and Firebase for APNs authentication to work? Could this be a certificate or provisioning profile mismatch issue (even when using a .p8 key)? Is there a way to manually validate APNs authentication from Firebase outside of actual push delivery? Any insight or guidance would be incredibly helpful. I’m new to developing and have tried repeated efforts to fix this issue but still haven’t resolved it. Thanks in advance!

Recently a bunch of folks have asked about why a specific symbol is being referenced by their app. This is my attempt to address that question. If you have questions or comments, please start a new thread. Tag it with Linker so that I see it. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Determining Why a Symbol is Referenced In some situations you might want to know why a symbol is referenced by your app. For example: You might be working with a security auditing tool that flags uses of malloc. You might be creating a privacy manifest and want to track down where your app is calling stat. This post is my attempt at explaining a general process for tracking down the origin of these symbol references. This process works from ‘below’. That is, it works ‘up’ from you app’s binary rather than ‘down’ from your app’s source code. That’s important because: It might be hard to track down all of your source code, especially if you’re using one or more package management systems. If your app has a binary dependency on a static library, dynamic library, or framework, you might not have access to that library’s source code. IMPORTANT This post assumes the terminology from An Apple Library Primer. Read that before continuing here. The general outline of this process is: Find all Mach-O images. Find the Mach-O image that references the symbol. Find the object files (.o) used to make that Mach-O. Find the object file that references the symbol. Find the code within that object file. Those last few steps require some gnarly low-level Mach-O knowledge. If you’re looking for an easier path, try using the approach described in the A higher-level alternative section as a replacement for steps 3 through 5. This post assumes that you’re using Xcode. If you’re using third-party tools that are based on Apple tools, and specifically Apple’s linker, you should be able to adapt this process to your tooling. If you’re using a third-party tool that has its own linker, you’ll need to ask for help via your tool’s support channel. Find all Mach-O images On Apple platforms an app consists of a number of Mach-O images. Every app has a main executable. The app may also embed dynamic libraries or frameworks. The app may also embed app extensions or system extensions, each of which have their own executable. And a Mac app might have embedded bundles, helper tools, XPC services, agents, daemons, and so on. To find all the Mach-O images in your app, combine the find and file tools. For example: % find "Apple Configurator.app" -print0 | xargs -0 file | grep Mach-O Apple Configurator.app/Contents/MacOS/Apple Configurator: Mach-O universal binary with 2 architectures: [x86_64:Mach-O 64-bit executable x86_64] [arm64] … Apple Configurator.app/Contents/MacOS/cfgutil: Mach-O universal binary with 2 architectures: [x86_64:Mach-O 64-bit executable x86_64] [arm64:Mach-O 64-bit executable arm64] … Apple Configurator.app/Contents/Extensions/ConfiguratorIntents.appex/Contents/MacOS/ConfiguratorIntents: Mach-O universal binary with 2 architectures: [x86_64:Mach-O 64-bit executable x86_64] [arm64:Mach-O 64-bit executable arm64] … Apple Configurator.app/Contents/Frameworks/ConfigurationUtilityKit.framework/Versions/A/ConfigurationUtilityKit: Mach-O universal binary with 2 architectures: [x86_64:Mach-O 64-bit dynamically linked shared library x86_64] [arm64] … This shows that Apple Configurator has a main executable (Apple Configurator), a helper tool (cfgutil), an app extension (ConfiguratorIntents), a framework (ConfigurationUtilityKit), and many more. This output is quite unwieldy. For nicer output, create and use a shell script like this: % cat FindMachO.sh #! /bin/sh # Passing `-0` to `find` causes it to emit a NUL delimited after the # file name and the `:`. Sadly, macOS `cut` doesn’t support a nul # delimiter so we use `tr` to convert that to a DLE (0x01) and `cut` on # that. # # Weirdly, `find` only inserts the NUL on the primary line, not the # per-architecture Mach-O lines. We use that to our advantage, filtering # out the per-architecture noise by only passing through lines # containing a DLE. find "$@" -type f -print0 \ | xargs -0 file -0 \ | grep -a Mach-O \ | tr '\0' '\1' \ | grep -a $(printf '\1') \ | cut -d $(printf '\1') -f 1 Find the Mach-O image that references the symbol Once you have a list of Mach-O images, use nm to find the one that references the symbol. The rest of this post investigate a test app, WaffleVarnishORama, that’s written in Swift but uses waffle management functionality from the libWaffleCore.a static library. The goal is to find the code that calls calloc. This app has a single Mach-O image: % FindMachO.sh "WaffleVarnishORama.app" WaffleVarnishORama.app/WaffleVarnishORama Use nm to confirm that it references calloc: % nm "WaffleVarnishORama.app/WaffleVarnishORama" | grep "calloc" U _calloc The _calloc symbol has a leading underscore because it’s a C symbol. This convention dates from the dawn of Unix, where the underscore distinguish C symbols from assembly language symbols. The U prefix indicates that the symbol is undefined, that is, the Mach-O images is importing the symbol. If the symbol name is prefixed by a hex number and some other character, like T or t, that means that the library includes an implementation of calloc. That’s weird, but certainly possible. OTOH, if you see this then you know this Mach-O image isn’t importing calloc. IMPORTANT If this Mach-O isn’t something that you build — that is, you get this Mach-O image as a binary from another developer — you won’t be able to follow the rest of this process. Instead, ask for help via that library’s support channel. Find the object files used to make that Mach-O image The next step is to track down which .o file includes the reference to calloc. Do this by generating a link map. A link map is an old school linker feature that records the location, size, and origin of every symbol added to the linker’s output. To generate a link map, enable the Write Link Map File build setting. By default this puts the link map into a text (.txt) file within the derived data directory. To find the exact path, look at the Link step in the build log. If you want to customise this, use the Path to Link Map File build setting. A link map has three parts: A simple header A list of object files used to build the Mach-O image A list of sections and their symbols In our case the link map looks like this: # Path: …/WaffleVarnishORama.app/WaffleVarnishORama # Arch: arm64 # Object files: [ 0] linker synthesized [ 1] objc-file [ 2] …/AppDelegate.o [ 3] …/MainViewController.o [ 4] …/libWaffleCore.a[2](WaffleCore.o) [ 5] …/Foundation.framework/Foundation.tbd … # Sections: # Address Size Segment Section 0x100008000 0x00001AB8 __TEXT __text … The list of object files contains: An object file for each of our app’s source files — That’s AppDelegate.o and MainViewController.o in this example. A list of static libraries — Here that’s just libWaffleCore.a. A list of dynamic libraries — These might be stub libraries (.tbd), dynamic libraries (.dylib), or frameworks (.framework). Focus on the object files and static libraries. The list of dynamic libraries is irrelevant because each of those is its own Mach-O image. Find the object file that references the symbol Once you have list of object files and static libraries, use nm to each one for the calloc symbol: % nm "…/AppDelegate.o" | grep calloc % nm "…/MainViewController.o" | grep calloc % nm "…/libWaffleCore.a" | grep calloc U _calloc This indicates that only libWaffleCore.a references the calloc symbol, so let’s focus on that. Note As in the Mach-O case, the U prefix indicates that the symbol is undefined, that is, the object file is importing the symbol. Find the code within that object file To find the code within the object file that references the symbol, use the objdump tool. That tool takes an object file as input, but in this example we have a static library. That’s an archive containing one or more object files. So, the first step is to unpack that archive: % mkdir "libWaffleCore-objects" % cd "libWaffleCore-objects" % ar -x "…/libWaffleCore.a" % ls -lh total 24 -rw-r--r-- 1 quinn staff 4.1K 8 May 11:24 WaffleCore.o -rw-r--r-- 1 quinn staff 56B 8 May 11:24 __.SYMDEF SORTED There’s only a single object file in that library, which makes things easy. If there were a multiple, run the following process over each one independently. To find the code that references a symbol, run objdump with the -S and -r options: % xcrun objdump -S -r "WaffleCore.o" … ; extern WaffleRef newWaffle(void) { 0: d10083ff sub sp, sp, #32 4: a9017bfd stp x29, x30, [sp, #16] 8: 910043fd add x29, sp, #16 c: d2800020 mov x0, #1 10: d2800081 mov x1, #4 ; Waffle * result = calloc(1, sizeof(Waffle)); 14: 94000000 bl 0x14 <ltmp0+0x14> 0000000000000014: ARM64_RELOC_BRANCH26 _calloc … Note the ARM64_RELOC_BRANCH26 line. This tells you that the instruction before that — the bl at offset 0x14 — references the _calloc symbol. IMPORTANT The ARM64_RELOC_BRANCH26 relocation is specific to the bl instruction in 64-bit Arm code. You’ll see other relocations for other instructions. And the Intel architecture has a whole different set of relocations. So, when searching this output don’t look for ARM64_RELOC_BRANCH26 specifically, but rather any relocation that references _calloc. In this case we’ve built the object file from source code, so WaffleCore.o contains debug symbols. That allows objdump include information about the source code context. From that, we can easily see that calloc is referenced by our newWaffle function. To see what happens when you don’t have debug symbols, create an new object file with them stripped out: % cp "WaffleCore.o" "WaffleCore-stripped.o" % strip -x -S "WaffleCore-stripped.o" Then repeat the objdump command: % xcrun objdump -S -r "WaffleCore-stripped.o" … 0000000000000000 <_newWaffle>: 0: d10083ff sub sp, sp, #32 4: a9017bfd stp x29, x30, [sp, #16] 8: 910043fd add x29, sp, #16 c: d2800020 mov x0, #1 10: d2800081 mov x1, #4 14: 94000000 bl 0x14 <_newWaffle+0x14> 0000000000000014: ARM64_RELOC_BRANCH26 _calloc … While this isn’t as nice as the previous output, you can still see that newWaffle is calling calloc. A higher-level alternative Grovelling through Mach-O object files is quite tricky. Fortunately there’s an easier approach: Use the -why_live option to ask the linker why it included a reference to the symbol. To continue the above example, I set the Other Linker Flags build setting to -Xlinker / -why_live / -Xlinker / _calloc and this is what I saw in the build transcript: _calloc from /usr/lib/system/libsystem_malloc.dylib _newWaffle from …/libWaffleCore.a[2](WaffleCore.o) _$s18WaffleVarnishORama18MainViewControllerC05tableE0_14didSelectRowAtySo07UITableE0C_10Foundation9IndexPathVtFTf4dnn_n from …/MainViewController.o _$s18WaffleVarnishORama18MainViewControllerC05tableE0_14didSelectRowAtySo07UITableE0C_10Foundation9IndexPathVtF from …/MainViewController.o Demangling reveals a call chain like this: calloc newWaffle WaffleVarnishORama.MainViewController.tableView(_:didSelectRowAt:) WaffleVarnishORama.MainViewController.tableView(_:didSelectRowAt:) and that should be enough to kick start your investigation. IMPORTANT The -why_live option only works if you dead strip your Mach-O image. This is the default for the Release build configuration, so use that for this test. Revision History 2025-07-18 Added the A higher-level alternative section. 2024-05-08 First posted.

I have an MAUI based application build and ready for the distribution. The application is working perfectly in the debug environment on the simulator. So the app logic is working correctly as expected without any errors. But when a release build is created the application crashes on the simulator and physical device. I'm developing the application using .Net 10 framework with target device iOS 26. The Supported OS Platform is set to 15.0 in csproj file. Also have the entitlements. plist file set in the csproj. The IDe used is Visual Studio Code for Mac (MAC OS). The application uses MSAL for the login / authentication purpose (Microsoft.Identity.Client) and SQLite Database (Sqlite-net-pcl) Message: Kindly guide me to build the application correctly in release version and get the ipa file ready for the in house distribution that could be deployed correctly on the physical device with iOS 18 / 26.

TL;DR version: AkVox - “Your App in Your User’s Language” Quickly and easily localize your app into as few or as many languages as you want with AkVox. Longer version: AkVox can localize any Xcode project. Simply drag your Exported Localizations folder into AkVox, click translate, then export, and you’re ready to import the translated localizations catalogs back into Xcode. Alas, you cannot import the whole localizations folder as one, you must import each catalog individually, a process that takes around 10 seconds per language. AkVox can also assist you when you’re ready to publish your app on App Store Connect. You can create a list of texts you will enter to promote your app and AkVox will translate them. Again, you can’t apply all your translations to the App Store in ne go, you have to apply each language individually. To make this task less painful, AkVox has a convenient set of buttons to make the copy and paste process as quick and simple as possible. The same arrangement is available when you come to add “mini texts” during setting monetization subscriptions. AkVox employs Google Cloud Translate which means you will need an API Key to be able to run full translations. However, Google offers a generous monthly allowance of 500,000 characters to be translated for free each month. This may well mean that you don’t ever pay for the translation process, just the very low price to use AkVox. The free version of AkVox simulates translating by substituting jumbled versions of Hamlet’s “To be or not to be” speech – this is instead of utilising what would normally be used in this case, the tediously dull Lorem Ipsum text. To see AkVox explained in detail, go to the website: https://akvox.com/

I'm adding a few custom signposts with mxSignpost(.begin,...) and mxSignpost(.end,...). Is there a way to force delivery of the MXMetricPayload so I don't need to wait for the daily aggregation to be pushed?

For the Linux version of my application which is written in C++ using Qt, I display the CHM format help files with this code: QString helpFile{ QCoreApplication::applicationDirPath() + "/Help/" + tr("DeepSkyStacker Help.chm","IDS_HELPFILE") }; QString program{ "kchmviewer" }; QStringList arguments{ "-token", "com.github.deepskystacker", helpFile }; helpProcess->startDetached(program, arguments); (helpProcess is a pointer to a QProcess object) The -token com.github.deepskystackerpart of that ensures that only a single instance of the viewer is used for any code that uses that invocation. Are there any chm file viewers for macOS that are capable of that sort of trick? The ones I've found on the App Store give minimal information and appear to be very simple minded tools that are not not intended for integration into an application as above. I know that MacPorts offers ports of kchmviewer but I'd prefer not to use either that or HomeBrew ... David

After combing the forums and release nodes, here are some extra notes to help other developers using Apple-Hosted Background Assets. I don't promise I got this perfect, but it may help direct you. AssetPack.Status is an OptionSet (not an enum!) - Critical API detail missing from guide It's a bitmask where values can be combined 2⁰ (1) = available to download 2¹ (2) = update available 2² (4) = up to date 2⁶ (64) = downloaded Example: status value 69 = 0b1000101 = available + up to date + downloaded Use .contains() method to check specific flags AssetPack.version property - Undocumented feature Auto-assigned by App Store Connect for Apple-hosted packs Increments with each upload of same asset pack ID No file deduplication across asset packs Same file in two packs = counts twice toward 200GB limit Best practice: create separate pack for shared files Shared namespace path requirements Asset pack ID is NOT part of file path Each file must have unique relative path across ALL app's asset packs Example: Foo/10/239/414.png and Bar/10/239/414.png are distinct and won't collide Additional url(for:) bugs beyond iOS 26.1 fix iOS 26 Beta 5: "item with same name already exists" error Workaround: Request URL for directory, then manually append filename TestFlight-only availability - Major limitation not mentioned! Apple-hosted packs currently ONLY work for internal testers on TestFlight or from App Store. Won't work from Xcode until "later this year" HTTP 400 errors expected for non-TestFlight installs ba-serve port workaround URL override port bug exists on multiple device types Use ba-serve -p 443 instead of custom ports

Merhaba, iOS üzerinde bir sözleşme onay uygulaması geliştiriyorum. Kullanıcıların dijital ortamda sözleşmeleri okuyup onaylaması gerekiyor. Ancak hukuki geçerlilik konusunda bazı tereddütlerim vardı. Bursa’da yaşayan biri olarak bu konuda bir avukata danışmam gerekti. Şans eseri https://www.avukatcanata.com ile karşılaştım ve hem bireysel hem ticari sözleşmeler konusunda gerçekten çok net açıklamalar sundular. Özellikle elektronik imza ve KVKK uyumu hakkında verdikleri bilgiler sayesinde projemi yasal zemine oturtabildim. Eğer bu tarz uygulamalar geliştiriyorsanız, mutlaka bir hukukçu görüşü alın. Yanlış bir adım size veya kullanıcınıza ciddi sonuçlar doğurabilir. Teşekkürler 🍏

I am trying to integrate Apple Music API using MusicKit and need to generate a Developer Token. However, when I try to create a new key from the Certificates, Identifiers &amp; Profiles section, the “Media Services (MusicKit, ShazamKit, Apple Music Feed)” option is grayed out. We are getting the error 'there are no identifiers available that can be associated with the key.' Although we did checkmark 'musickit' in app services. I have already: Enrolled in the paid Apple Developer Program Created a valid App ID under Identifiers Logged in as the Account Holder Tried multiple browsers and devices Despite this, the option remains disabled. Could you please enable this or let me know what further steps I need to take? Thank you!

I am running Appium tests on an iOS 18 simulator, and I am encountering an intermittent issue where the device screen gets locked unexpectedly during the tests. The Appium logs show no errors or unusual activity, and all commands appear to be executed successfully. However, upon reviewing the device logs, I see entries related to the lock event, but the exact cause remains unclear. SpringBoard: (SpringBoard) [com.apple.SpringBoard:Common] lockUIFromSource:Boot options:{ SBUILockOptionsLockAutomaticallyKey: 1, SBUILockOptionsForceLockKey: 1, SBUILockOptionsUseScreenOffModeKey: 0 } SpringBoard: (SpringBoard) [com.apple.SpringBoard:Common] -[SBTelephonyManager inCall] 0 SpringBoard: (SpringBoard) [com.apple.SpringBoard:Common] LockUI from source: Now locking Has anyone experienced similar behavior with Appium on iOS 18, or could there be a setting or configuration in the simulator that is causing this issue?

i have been added to an apple membership organization, and given App manager's rights b ut my build keeps failing and asking me to get more access

My application targets iOS 15+. Attempting to build and run it on my iPhone SE (orphaned at iOS 15.6) results in "Failed to prepare the device for development." I'm building with Xcode 15.2. What is the expected procedure here?

Hey, Since I set up push notifications for my Flutter app following this tutorial https://documentation.onesignal.com/docs/flutter-sdk-setup, my Flutter app no ​​longer builds for iOS in the CD pipeline. I get the following error: [17:24:47]: ▸ ProcessException: Process exited abnormally with exit code -6: [17:24:47]: ▸ Command line invocation: [17:24:47]: ▸ /Applications/Xcode_15.4.app/Contents/Developer/usr/bin/xcodebuild -list [17:24:47]: ▸ User defaults from command line: [17:24:47]: ▸ IDEPackageSupportUseBuiltinSCM = YES [17:24:47]: ▸ 2025-03-10 17:24:46.855 xcodebuild[13337:34491] [MT] DVTAssertions: ASSERTION FAILURE in DevToolsCore/Xcode3Core/LegacyProjects/Frameworks/DevToolsCore/DevToolsCore/ProjectModel/DataModel/References/SynchronizedGroups/PBXFileSystemSynchronizedAbstractGroup.m:28 [17:24:47]: ▸ Details: Assertion failed: IDEFileSystemSynchronizedGroupsAreEnabled() [17:24:47]: ▸ Object: <PBXFileSystemSynchronizedRootGroup> [17:24:47]: ▸ Method: +allocWithZone: [17:24:47]: ▸ Thread: <_NSMainThread: 0x60000026c200>{number = 1, name = main} [17:24:47]: ▸ Hints: [17:24:47]: ▸ Backtrace: [17:24:47]: ▸ 0 -[DVTAssertionHandler handleFailureInMethod:object:fileName:lineNumber:assertionSignature:messageFormat:arguments:] (in DVTFoundation) [17:24:47]: ▸ 1 _DVTAssertionHandler (in DVTFoundation) [17:24:47]: ▸ 2 _DVTAssertionFailureHandler (in DVTFoundation) [17:24:47]: ▸ 3 _DVTAssertionWarningHandler (in DVTFoundation) My pipeline looks like this: name: iOS Build and Deploy to App Store with Custom Version on: workflow_dispatch: inputs: version: description: 'Version number' required: true default: '1.0.0' env: FLUTTER_CHANNEL: "stable" RUBY_VERSION: "3.2.2" jobs: build_ios: name: Build iOS runs-on: macos-latest timeout-minutes: 20 steps: - name: Checkout uses: actions/checkout@v4 - name: Set up Ruby uses: ruby/setup-ruby@v1 with: ruby-version: ${{ env.RUBY_VERSION }} bundler-cache: true working-directory: 'daytistics/ios' - name: Clean up vendor working-directory: 'daytistics/ios' run: rm -rf vendor - name: Install Bundler Gems working-directory: 'daytistics/ios' run: bundle install - name: Run Flutter tasks and get pub packages uses: subosito/flutter-action@v2.16.0 with: flutter-version-file: 'daytistics/pubspec.yaml' channel: ${{ env.FLUTTER_CHANNEL }} cache: true - name: Get Flutter Packages working-directory: ./daytistics run: flutter pub get - name: Install Bundler Gems working-directory: 'daytistics/ios' run: | bundle install bundle exec pod repo update # Add this line # Remove the "Reinstall CocoaPods" step entirely - name: Pod Install working-directory: 'daytistics/ios' run: bundle exec pod install - name: Clean Flutter build working-directory: ./daytistics run: flutter clean - name: Create .env file working-directory: ./daytistics run: touch .env - uses: maierj/fastlane-action@v3.1.0 with: lane: 'release_app_store' subdirectory: daytistics/ios options: '{ "version_number": "${{ github.event.inputs.version }}", "env_vars": ["SUPABASE_URL", "SUPABASE_ANON_KEY", "POSTHOG_API_KEY", "SUPABASE_AUTH_EXTERNAL_GOOGLE_CLIENT_ID", "SENTRY_DSN"] }' env: ASC_KEY_ID: ${{ secrets.ASC_KEY_ID }} ASC_ISSUER_ID: ${{ secrets.ASC_ISSUER_ID }} ASC_KEY_P8_BASE64: ${{ secrets.ASC_KEY_P8_BASE64 }} MATCH_PASSWORD: ${{ secrets.MATCH_PASSWORD }} MATCH_GIT_BASIC_AUTHORIZATION: ${{ secrets.MATCH_GIT_BASIC_AUTHORIZATION }} APP_BUNDLE_ID: ${{ secrets.APP_BUNDLE_ID }} GH_TOKEN: ${{ secrets.GITHUB_TOKEN }} SUPABASE_URL: ${{ secrets.SUPABASE_URL }} SUPABASE_ANON_KEY: ${{ secrets.SUPABASE_ANON_KEY }} POSTHOG_API_KEY: ${{ secrets.POSTHOG_API_KEY }} SUPABASE_AUTH_EXTERNAL_GOOGLE_CLIENT_ID: ${{ secrets.SUPABASE_AUTH_EXTERNAL_GOOGLE_CLIENT_ID }} SENTRY_DSN: ${{ secrets.SENTRY_DSN }} Everything works as expected in the simulator. However, I think that the problem isn't related to the pipeline. Instead I think it is related to the "Signing Capabilities" in X-Code: https://i.sstatic.net/E0tSetZP.png https://i.sstatic.net/oC1xG0A4.png Thanks for your help!

如何在没有电脑的情况下启用开发者模式 please reply me in Chinese

We are developing a cross platform c++ application. We also use some objective-c (no swift) and specific Apple frameworks like AVFoundation, CoreML in the MacOs version of our software. We use Apple Clang as compiler when building for MacOs. As our code is primarily c++ we would like to use the latest and greatest c++ 20 features. So we are looking into using vanilla clang instead, the builds with vanilla clang seem to work fine, however our concern is that we might have overlooked possible issues that could arise. So our question is whether there are specific things we need to address when switching compilers, are there things that we need to be aware of? In the end we just want to know if switching compilers won't cause problems we can't oversee. So we would like to know if others took the same steps and what your thoughts/experiences are regarding this?

Objective: Downloading and running an old Swift iOS App on iPhone 5s with iOS 12.5.8. Development System and Tools: Apple macBook, M4 Pro, running macOS Tahoe 26.3.1 (25D2128). Xcode Version 26.3 (17C529)

I developed an app using Unity and exported it as an iOS project file so that I could package it in Xcode. Now, I’m facing an issue where users who previously installed version 1.0 are still seeing the old version after installing the updated version 2.0. Although the installation process for version 2.0 appears to complete (with the installation animation), the app still opens as version 1.0. I am an individual developer but used enterprise signing for distribution. I’m quite confused and have looked into the issue—some sources mention it might be related to CFBundleVersion, but modifying it didn’t help. I’d really appreciate some help with this. o(╥﹏╥)o