I want an AR character to be able to look at a position while still playing the characters animation. So far, I managed to manually adjust a single bone rotation using skeletalComponent.poses.default = Transform( scale: baseTransform.scale, rotation: lookAtRotation, translation: baseTransform.translation ) which I run at every rendering update, while a full body animation is running. But of course, hardcoding single joints to point into a direction (in my case the head) does not look as nice, as if I were to run some inverse cinematic that includes, hips + neck + head joints. I found some good IKRig code in Composing interactive 3D content with RealityKit and Reality Composer Pro. But when I try to adjust rigs while animations are playing, the animations are usually winning over the IKRig changes to the mesh.

Are there any changes to RotationSystem: System and RotationComponent: Component that I should be aware of to see if I need to update my use in my visionOS app?

I'm placing sphere at finger tip and updating its position as hand move. Finger joint tracking functions correctly, but I’ve observed noticeable latency in hand tracking updates whenever a UITextView becomes active. This lag happens intermittently during app usage, lasting about 5–10 seconds, after which the latency disappears and the sphere starts following the finger joints immediately. When I open the immersive space for the first time, the profiler shows a large performance spike upto 328%. After that, it stabilizes and runs smoothly. Note: I don’t observe any lag when CPU usage spikes to 300% (upon immersive view load) yet the lag still occurs even when CPU usage remains below 100%. I’m using the following code for hand tracking: private func processHandTrackingUpdates() async { for await update in handTracking.anchorUpdates { let handAnchor = update.anchor if handAnchor.isTracked { switch handAnchor.chirality { case .left: leftHandAnchor = handAnchor updateHandJoints(for: handAnchor, with: leftHandJointEntities) case .right: rightHandAnchor = handAnchor updateHandJoints(for: handAnchor, with: rightHandJointEntities) } } else { switch handAnchor.chirality { case .left: leftHandAnchor = nil hideAllJoints(in: leftHandJointEntities) case .right: rightHandAnchor = nil hideAllJoints(in: rightHandJointEntities) } } await MainActor.run { handTrackingData.processNewHandAnchors( leftHand: self.leftHandAnchor, rightHand: self.rightHandAnchor ) } } } And here’s the function I’m using to update the joint positions: private func updateHandJoints( for handAnchor: HandAnchor, with jointEntities: [HandSkeleton.JointName: Entity] ) { guard handAnchor.isTracked else { hideAllJoints(in: jointEntities) return } // Check if the little finger tip and intermediate base are both tracked. if let tipJoint = handAnchor.handSkeleton?.joint(.littleFingerTip), let intermediateBaseJoint = handAnchor.handSkeleton?.joint(.littleFingerIntermediateTip), tipJoint.isTracked, intermediateBaseJoint.isTracked, let pinkySphere = jointEntities[.littleFingerTip] { // Convert joint transforms to world space. let tipTransform = handAnchor.originFromAnchorTransform * tipJoint.anchorFromJointTransform let intermediateBaseTransform = handAnchor.originFromAnchorTransform * intermediateBaseJoint.anchorFromJointTransform // Extract positions from the transforms. let tipPosition = SIMD3<Float>(tipTransform.columns.3.x, tipTransform.columns.3.y, tipTransform.columns.3.z) let intermediateBasePosition = SIMD3<Float>(intermediateBaseTransform.columns.3.x, intermediateBaseTransform.columns.3.y, intermediateBaseTransform.columns.3.z) // Calculate the midpoint. let midpointPosition = (tipPosition + intermediateBasePosition) / 2.0 // Position the sphere at the midpoint and make it visible. pinkySphere.isEnabled = true pinkySphere.transform.translation = midpointPosition } else { // If either joint is not tracked, hide the sphere. jointEntities[.littleFingerTip]?.isEnabled = false } // Update the positions of all other hand joint spheres. for (jointName, entity) in jointEntities { if jointName == .littleFingerTip { // Already handled the pinky above. continue } guard let joint = handAnchor.handSkeleton?.joint(jointName), joint.isTracked else { entity.isEnabled = false continue } entity.isEnabled = true let jointTransform = handAnchor.originFromAnchorTransform * joint.anchorFromJointTransform entity.transform.translation = SIMD3<Float>(jointTransform.columns.3.x, jointTransform.columns.3.y, jointTransform.columns.3.z) } } I’ve attached both a profiler trace and a video recording from Vision Pro that clearly demonstrate the issue. Profiler: https://drive.google.com/file/d/1fDWyGj_fgxud2ngkGH_IVmuH_kO-z0XZ Vision Pro Recordings: https://drive.google.com/file/d/17qo3U9ivwYBsbaSm26fjaOokkJApbkz- https://drive.google.com/file/d/1LxTxgudMvWDhOqKVuhc3QaHfY_1x8iA0 Has anyone else experienced this behavior? My thought is that there might be some background calculations happening at the OS level causing this latency. Any guidance would be greatly appreciated. Thanks!

Hello, In my project, I have attached a ManipulationComponent to Entity A and as expected, I'm able interact with it using the built-in gestures. I have another Entity B which is a child of A that I would like to interact with as well, so I attempted to add a ManipulationComponent to B. However, no gestures seem to be registered on B; I can still interact with A but B cannot be interacted with despite having ManipulationComponents on both entities. So I'm wondering if I'm just doing something wrong, if this is an issue with the ManipulationComponent, or if this is a limitation of the API. Attached is the code used to add the ManipulationComponent to an Entity and it was done on both A and B: let mc = ManipulationComponent() model.components.set(mc) var boxShape = ShapeResource.generateBox(width: 0.25, height: 0.05, depth: 0.25) boxShape = boxShape.offsetBy(translation: simd_float3(0, -0.05, -0.25)) ManipulationComponent.configureEntity(model, collisionShapes: [boxShape]) if var mc = model.components[ManipulationComponent.self] { mc.releaseBehavior = .stay mc.dynamics.inertia = .low model.components.set(mc) } I am using visionOS 26.0; let me know if there's any additional information needed.

Can we constrain or clamp translation with the new ManipulationComponent? For example, allow free movement within certain bounds.

How do I configure a Unity project for a fully immersive VR app on Apple Vision Pro using Metal Rendering, and add a simple pinch-to-teleport-where-looking feature? I've tried the available samples and docs, but they don't cover this clearly (to me). So far, I've reviewed Unity XR docs, Apple dev guides, and tutorials, but most emphasize spatial apps. Metal examples exist but don't include teleportation. Specifically: visionOS sample "XRI_SimpleRig" – Deploys to device/simulator, but no full immersion or teleport. XRI Toolkit sample "XR Origin Hands (XR Rig)" – Pinch gestures detect, but not linked to movement. visionOS "XR Plugin" sample "Metal Sample URP" – Metal setup works, but static scene without locomotion. I'm new in Unity XR development and would appreciate a simple, standalone scene or document focused only on the essentials for "teleport to gaze on pinch" in VR mode—no extra features. I do have some experience in unreal, world toolkit, cosmo, etc from the 90's and I'm ok with code. Please include steps for: Setting up immersive VR (disabling spatial defaults if needed). Integrating pinch detection with ray-based teleport. Any config changes or basic scripts. Project Configuration: Unity Editor Version: 6000.2.5f1.2588.7373 (Revision: 6000.2/staging 43d04cd1df69) Installed Packages: Apple visionOS XR Plugin: 2.3.1 AR Foundation: 6.2.0 PolySpatial XR: 2.3.1 XR Core Utilities: 2.5.3 XR Hands: 1.6.1 XR Interaction Toolkit: 3.2.1 XR Legacy Input Helpers: 2.1.12 XR Plugin Management: 4.5.1 Imported Samples: Apple visionOS XR Plugin 2.3.1: Metal Sample - URP XR Hands 1.6.1 XR Interaction Toolkit 3.2.1: Hands Interaction Demo, Starter Assets, visionOS Build Platform Settings: Target: Apple visionOS App Mode: Metal Rendering with Compositor Services Selected Validation Profiles: visionOS Metal Documentation: Enabled Xcode Version: 26.01 visionOS SDK: 26 Mac Hardware: Apple M1 Max Target visionOS Version: 20 or 26 Test Environment: Model: Apple Vision Pro, visionOS 26.0.1 (23M341), Apple M1 Max No errors in builds so far; just missing the desired functionality. Thanks for a complete response with actionable steps.

Hi, I wanted to ask if you are familiar with a way of making the Logitech Muse sterile for operation room use?

We’re trying to build a custom player for Unity. For this, we’re using AVPlayer with AVPlayerItemVideoOutput to get textures. However, we noticed that playback is not smooth and the stream often freezes. For testing, we used this 8K video: https://deovr.com/nwfnq1 The video was played using the following code: @objc public func playVideo(urlString: String) { guard let url = URL(string: urlString) else { return } let pItem = AVPlayerItem(url: url) playerItem = pItem pItem.preferredForwardBufferDuration = 10.0 let pixelBufferAttributes: [String: Any] = [ kCVPixelBufferPixelFormatTypeKey as String: kCVPixelFormatType_420YpCbCr8BiPlanarVideoRange, kCVPixelBufferMetalCompatibilityKey as String: true, ] let output = AVPlayerItemVideoOutput( pixelBufferAttributes: pixelBufferAttributes ) pItem.add(output) playerItemObserver = pItem.observe(\.status) { [weak self] pItem, _ in guard pItem.status == .readyToPlay else { return } self?.playerItemObserver = nil self?.player.play() } player = AVPlayer(playerItem: pItem) player.currentItem?.preferredPeakBitRate = 35_000_000 } When AVPlayerItemVideoOutput is attached, the video stutters and the log looks like this: 🟢 Playback likely to keep up 🟡 Buffer ahead: 4.08s | buffer: 4.08s 🟡 Buffer ahead: 4.08s | buffer: 4.08s 🟡 Buffer ahead: -0.07s | buffer: 0.00s 🟡 Buffer ahead: 2.94s | buffer: 3.49s 🟡 Buffer ahead: 2.50s | buffer: 4.06s 🟡 Buffer ahead: 1.74s | buffer: 4.30s 🟡 Buffer ahead: 0.74s | buffer: 4.30s 🟠 Playback may stall 🛑 Buffer empty 🟡 Buffer ahead: 0.09s | buffer: 4.30s 🟠 Playback may stall 🟠 Playback may stall 🛑 Buffer empty 🟠 Playback may stall 🟣 Buffer full 🟡 Buffer ahead: 1.41s | buffer: 1.43s 🟡 Buffer ahead: 1.41s | buffer: 1.43s 🟡 Buffer ahead: 1.07s | buffer: 1.43s 🟣 Buffer full 🟡 Buffer ahead: 0.47s | buffer: 1.65s 🟠 Playback may stall 🛑 Buffer empty 🟡 Buffer ahead: 0.10s | buffer: 1.65s 🟠 Playback may stall 🟡 Buffer ahead: 1.99s | buffer: 2.03s 🟡 Buffer ahead: 1.99s | buffer: 2.03s 🟣 Buffer full 🟣 Buffer full 🟡 Buffer ahead: 1.41s | buffer: 2.00s 🟡 Buffer ahead: 0.68s | buffer: 2.27s 🟡 Buffer ahead: 0.09s | buffer: 2.27s 🟠 Playback may stall 🛑 Buffer empty 🟠 Playback may stall When we remove AVPlayerItemVideoOutput from the player, the video plays smoothly, and the output looks like this: 🟢 Playback likely to keep up 🟡 Buffer ahead: 1.94s | buffer: 1.94s 🟡 Buffer ahead: 1.94s | buffer: 1.94s 🟡 Buffer ahead: 1.22s | buffer: 2.22s 🟡 Buffer ahead: 1.05s | buffer: 3.05s 🟡 Buffer ahead: 1.12s | buffer: 4.12s 🟡 Buffer ahead: 1.18s | buffer: 5.18s 🟡 Buffer ahead: 0.72s | buffer: 5.72s 🟡 Buffer ahead: 1.27s | buffer: 7.28s 🟡 Buffer ahead: 2.09s | buffer: 3.03s 🟡 Buffer ahead: 4.16s | buffer: 6.10s 🟡 Buffer ahead: 6.66s | buffer: 7.09s 🟡 Buffer ahead: 5.66s | buffer: 7.09s 🟡 Buffer ahead: 4.66s | buffer: 7.09s 🟡 Buffer ahead: 4.02s | buffer: 7.45s 🟡 Buffer ahead: 3.62s | buffer: 8.05s 🟡 Buffer ahead: 2.62s | buffer: 8.05s 🟡 Buffer ahead: 2.49s | buffer: 3.53s 🟡 Buffer ahead: 2.43s | buffer: 3.38s 🟡 Buffer ahead: 1.90s | buffer: 3.85s We’ve tried different attribute settings for AVPlayerItemVideoOutput. We also removed all logic related to reading frame data, but the choppy playback still remained. Can you advise whether this is a player issue or if we’re doing something wrong?

In Vision OS app, We have two types of windows: Main App Window – This is the default window that launches when the app starts. It displays the video listings and other primary content. Immersive Space Window – This opens only when a user starts streaming or playing a video. Issue: When entering the immersive space, the main app window remains visible in front of it unless manually closed. To avoid this, I currently close the main window when transitioning to immersive space and reopen it when exiting. However, this causes the app to restart instead of resuming from its previous state. Desired Behavior: I want the main app window to retain its state and seamlessly resume from where it was before entering immersive mode, rather than restarting. Attempts & Challenges: Tried managing opacity, visibility, and state preservation, but none worked as expected. Couldn’t find a way to push the main window to the background while bringing the immersive space to the foreground. Looking for a solution to keep the main window’s state intact while transitioning between immersive and normal modes.

If I trigger the apple rating modal in an Immersive space it appears on the ground in (0,0,0) I need it to be in front of the user like push notification perimssion does or other permissions requests.

Hi, I'm working with CameraFrameProvider from Enterprise API. Is it always capped at 30fps, or is there something I can switch to get more? I assume it is capped at 30, so let me cram in additional question here :). If I'd get a developer strap and attach an external camera capable of doing >30fps, will I get the full stream, or some other limitation will kick in?

Hello Community, I’m currently working with the sample code “CapturingDepthUsingTheLiDARCamera” and using it to capture the depth map of an image taken with the iPhone 14 Pro. From this depth map, I generate a point cloud using the intrinsic camera parameters. I've noticed that objects not facing the camera directly appear distorted in the resulting point cloud. For example: An object with surfaces that are perpendicular to each other appears with a sharper angle in the point cloud — around 60° instead of 90°. My question is: Is this due to the general accuracy limitations of the LiDAR sensor? Or could it be related to the sample code? To obtain the depth map, I’m using: AVCapturePhoto.depthData.converting(toDepthDataType: kCVPixelFormatType_DepthFloat32) Thanks in advance for your help!

I created a new Spatial Rendering App from the template in Xcode 26.0.1. When I run the app, click 'Show Immersive Space' and select my Vision Pro from the pop-up dialog, the content in the dialog flickers (which seems to indicate something crashed) and nothing appears on my Vision Pro. I'm running the released macOS 26.0 (25A354) and visionOS 26.0 (23M336). Filed as FB20397093.

Hello, Want to understand what's the current state for developing for Apple Vision Pro? I want to stream a video from a remote server in realtime. It is a video stream and can't download it. I want to stream a low quality stream and high res stream. The server will only send the "box" where user is looking at. Are there any API to track where the user is looking at in the experience? Thanks,

Hi, I am in the process of implementing SharePlay into our app. The shared experience opens an Immersive Space and we set systemCoordinator.configuration.supportsGroupImmersiveSpace = true Now visionOS establishes a shared coordinate space for the immersive space. From the docs: To achieve consistent positioning of RealityKit entities across multiple devices in an immersive space during a SharePlay session There are cases where we want to position content in front of the user (independent of the shared session, and for each user individually). Normally to do that we use the transform retrieved via worldTrackingProvider.queryDeviceAnchor.originFromAnchorTransform to position content in front of the user (plus some Z Offset and smooth interpolation). This works fine in non-SharePlay instances and the device transform is where I would expect it to be but during the FaceTime call deviceAnchor.originFromAnchorTransform seems to use the shared origin of the immersive space and then I end up with a transform that might be offset. Here is a video of the issue in action: https://streamable.com/205r2p The blue rect is place using AnchorEntity(.head, trackingMode: .continuous). This works regardless of the call and the entity is always placed based on the head position. The green rect is adjusted on every frame using the transform I get from worldTrackingProvider.queryDeviceAnchor. As you can see it's offset. Is there any way I can query query this transform locally for the user during a FaceTime call? Also I would like to know if it's possible to disable this automatic entity transform syncing behavior? Setting entity.synchronization = nil results in the entity not showing up at all. https://developer.apple.com/documentation/realitykit/synchronizationcomponent Is SynchronizationComponent only relevant for the legacy MultiPeerConnectivity approach? Thank you!

I am building a 360 photo viewer in VisionOS 26. Which allows the user to choose a 2 by 1 jpg and then renders it with a sphere mesh entity. And I use: TextureResource(contentsOf: url, options: options). I noticed two situations here in terms of mipmaps options. When setting "mipmapsMode: .none": The graphic quality within the "gaze area" looks sharp and clear The two poles (top and bottom) are perfectly rendered Massive shimmer around the "gaze area" When setting "mipmapsMode: .allocateAndGenerateAll": The graphic looks slightly blurrier than in ".none" within the "gaze area" The two poles are very blurry and hard to recognize the texture Much less shimmer around the "gaze area" My question would be: Is there a way to have the perfect graphic quality in ".none" without the massive shimmer? Thank you! Screenshots: mipmapsMode: .none mipmapsMode: .allocateAndGenerateAll

When building a multiplayer Tabletop game, the documentation includes how to attach a custom TabletopNetworkSessionCoordinator, which could be used in addition to TabletopGame.MultiplayerDelegate. But so far, we have been unable to create these types of custom coordinators or have a delegate that works. Our current setup with our generic GroupActivity works by sending the session to TabletopGame's coordinateWithSession method (like in the current sample project), but we didn't find a way to access and control, for example, the arbiter, seats, player events, among other features mentioned on https://developer.apple.com/documentation/tabletopkit/tabletopnetworksession. Is correct to expect having access to the participants, messenger, or journal without having to maintain a parallel coordinator?   possibly we are missing something here; any suggestions?

When I show a window while a sky sphere is shown, the handles to drag/close/resize the window are hidden. The colliders still work, so they are there, but only the visuals are hidden. I already know from another project, that this also happens to volumes. They only appear once you get closer to the window or if the sky sphere gets removed. Is this a known issue or is there a fix for that? .persistentSystemOverlays(.visible)does not fix it Xcode 16.3.0 Beta, visionOS 2.4

Hi, would love for your help in that matter. I try to get the position in space of two QR codes to make an alignment to their positions in space. The detection shows that the QR codes position is always 0,0,0 and I don't understand why. Here's my code: import SwiftUI import RealityKit import RealityKitContent struct AnchorView: View { @ObservedObject var qrCoordinator: QRCoordinator @ObservedObject var coordinator: ImmersiveCoordinator let qrName: String @Binding var startQRDetection: Bool @State private var anchor: AnchorEntity? = nil @State private var detectionTask: Task<Void, Never>? = nil var body: some View { RealityView { content in // Add the QR anchor once (must exist before detection starts) if anchor == nil { let imageAnchor = AnchorEntity(.image(group: "QRs", name: qrName)) content.add(imageAnchor) anchor = imageAnchor print("📌 Created anchor for \(qrName)") } } .onChange(of: startQRDetection) { enabled in if enabled { startDetection() } else { stopDetection() } } .onDisappear { stopDetection() } } private func startDetection() { guard detectionTask == nil, let anchor = anchor else { return } detectionTask = Task { var detected = false while !Task.isCancelled && !detected { print("🔎 Checking \(qrName)... isAnchored=\(anchor.isAnchored)") if anchor.isAnchored { // wait a short moment to let transform update try? await Task.sleep(nanoseconds: 100_000_000) let worldPos = anchor.position(relativeTo: nil) if worldPos != .zero { // relative to modelRootEntity if available var posToSave = worldPos if let modelEntity = coordinator.modelRootEntity { posToSave = anchor.position(relativeTo: modelEntity) print("converted to model position") } else { print("⚠️ modelRootEntity not available, using world position") } print("✅ \(qrName) detected at position: world=\(worldPos) saved=\(posToSave)") if qrName == "reanchor1" { qrCoordinator.qr1Position = posToSave let marker = createMarker(color: [0,1,0]) marker.position = .zero // sits directly on QR marker.position = SIMD3<Float>(0, 0.02, 0) anchor.addChild(marker) print("marker1 added") } else if qrName == "reanchor2" { qrCoordinator.qr2Position = posToSave let marker = createMarker(color: [0,0,1]) marker.position = posToSave // sits directly on QR marker.position = SIMD3<Float>(0, 0.02, 0) anchor.addChild(marker) print("marker2 added") } detected = true } else { print("⚠️ \(qrName) anchored but still at origin, retrying...") } } try? await Task.sleep(nanoseconds: 500_000_000) // throttle loop } print("🛑 QR detection loop ended for \(qrName)") detectionTask = nil } } private func stopDetection() { detectionTask?.cancel() detectionTask = nil } private func createMarker(color: SIMD3<Float>) -> ModelEntity { let sphere = MeshResource.generateSphere(radius: 0.05) let material = SimpleMaterial(color: UIColor( red: CGFloat(color.x), green: CGFloat(color.y), blue: CGFloat(color.z), alpha: 1.0 ), isMetallic: false) let marker = ModelEntity(mesh: sphere, materials: [material]) marker.name = "marker" return marker } }

I’ve submitted the following feedback: FB13820942 (List Outline View Not Using Accent Color on Disclosure Caret for visionOS) I’d appreciate help on this to see if I’m doing something wrong or indeed it’s the way visionOS currently works and it’s a suggested feedback.