Has Roomplan been abandoned? Two years have gone by without comments from Apple on improvements. Are the improvements behind the scenes? Is there going to be any major updates?

Apple's new Spatial Personas use Gaussian Splatting, but I have not found any APIs for visionOS to display a Gaussian Splat like a PLY file. Am I just missing the Apple documentation? If not, are there common practices developers are using for displaying Gaussian Splats in visionOS?

Hello, I've pre-ordered the Logitech Muse with hopes of developing with it, but have yet to find any documentation relating to the capabilities it will have/any APIs that will be available to take advantage of the Muse. Is anyone aware of what might become available? Thank you in advance.

I have an open Feedback conversation with Apple on this topic, but I am curious if others have run into this, or want to try out my sample code in their set up. there are two API’s for reading controller buttons, axis, and D pads: GCPhysicalInputProfile and GCControllerLiveInput. There are inconsistencies in behaviour between the two of them. Apple recommends we use GCControllerLiveInput, however, there are some capabilities on these controllers that are only accessible through GCPhysicalInputProfile, as I’ll discuss below. PSVR2 R2/L2 buttons, a.k.a. triggers, have force input analogue values. These can only be accessed on GCPhysicalInputProfile PSVR2 thumbstick direction values are read through “axes” on GCPhysicalInputProfile, but only “dpads” on GCControllerLiveInput on both GCPhysicalInputProfile and GCControllerLiveInput, All pressed events of all buttons are fired properly using generic aliases ( Trigger, Grip ,Menu, Right Thumbstick, Left Thumbstick, Right Button A & B (Circle & Cross), Left Button A&B (Triangle and Square) ). Apple reserves the system button as the equivalent of a home button for the OS. on GCPhysicalInputProfile, touch events are fired when the button is also pressed, but not for only touches. on GCControllerLiveInput , Touch events only works for the following buttons: Left Thumbstick, Right Thumbstick, Right Button A (Circle), and Right Button B (Cross). But Right Button B touch event isn’t labelled correctly, it fires as the Right Button A event. I observed this inside ALVR which uses a polling based approach to event processing: https://github.com/alvr-org/alvr-visionos/blob/17b5968f9d894944b53e97134b39dfce0993302a/ALVRClient/WorldTracker.swift#L301 To simplify to see this on a very simple app, I used the Apple example TrackingAccessories application: https://developer.apple.com/documentation/ARKit/tracking-accessories-in-volumetric-windows I’ve attached the code that replaces the AccessoryTrackingModel class. I added code that prints out what is touched/pressed, see the trackAllConnectedSpatialControllers method: https://github.com/svrc/TrackingAccessories

Hello, I am in the process of implementing SharePlay support in my visionOS app. Everything runs fine when I test locally, but when my app is distributed via TestFlight, calling try await activity.activate() shows the SharePlay dialog as usual, but then when I start a new FaceTime call, my ImmersiveSpace gets dismissed. This is only happening when the app is distributed via TestFlight, when I run it locally the ImmersiveSpace stays active as expected. Looking at the console on my Mac I found this log: Invalid initial client settings class: UIApplicationSceneClientSettings; expected class: MRUISharedApplicationSceneClientSettings; bundle ID: com.apple.facetime; scene ID: com.apple.facetime:SFBSystemService-DDA8C751-C0C4-487E-AD85-59EF4E6C6050 Does anyone have an idea how I can fix this? It's driving me nuts and I wasted over a day looking for a workaround but so far been unsuccessful. Thanks!

This post documents an issue I reported in feedback FB19610114 and see if anyone knows of a workaround. Here is a copy of the feedback. Short version Manipulation (SwiftUI OR RealityKit) fails to translate entities after changing rooms. By changing rooms, I mean a human wearing an Apple Vision Pro leaving one room and entering another room. Once this issue occurs, it impacts all apps that use these features. A device restart is the only solution I have to fix it. Feedback FB19610114 This is an odd one. I'm using the new Manipulation Component in visionOS 26. Most of the time this works well. Sometime it stops working and when it does the only way to get it working again is to reboot the headset. When this happens, I can continue to rotate and scale items, but translation no longer works. It is as if the item is stuck to a fixed point in the parent scene (window, volume, etc). When this bug occurs, it affects every app across the entire operating system that is using manipulation, including the RealityKit component AND the SwiftUI version. This is not limited to one app and is not limited to apps that I am working on. Once this error occurs, it affects literally any application across the operating system that is using this API, including apps from Apple. I won't speculate on the cause of this, but I do know of one way where I can always get it to happen. Here is how to reproduce it: Make an Xcode project with a single entity that uses the Manipulation Component. There is no need to customize the configuration of this component. The default implementation will work. Build and run this app on device. You can keep running from device or quit and launch the app like normal on device. Open the app and manipulate the entity - it should work as expected. Physically walk into another room. It is vital that you leave the current room that you are in and enter a different room entirely. Use the digital crown to recenter your view and bring your window or volume to you. Test the manipulation on the entity again - it should still be working as expected at this point. Physically, move yourself and your headset into the original room where you started. Use the digital crown to recenter your view and bring your window or volume to you. Test the manipulation on the entity again - you should now see the issue. When I follow the steps above, then 100% of the time manipulation translation stops working at this point. It will impact any application using this API. The only way to fix it is to restart my headset. A few points to keep in mind It does not matter if an app is actively being run from Xcode. When this occurs, it impacts every single app, not just one. When this occurs, rotation and scaling continue to work, but the entity/view cannot be translated. This impacts BOTH the SwiftUI version and the RealityKit version. When this occurs, the only way to "fix" it is to reboot the device.

The new Mac virtual display feature on visionOS 2 offers a curved/panoramic window. I was wondering if this is simply a property that can be applied to a window, or if it involves an immersive mode or SceneKit/RealityKit?

How can I request access to Enterprise API for VisionPro with an individual developer account? I wanted it for learning and testing

Spatial photo in RealityView has a default corner radius. I made a parallel effect with spatial photos in ScrollView(like Spatial Gallery), but the corner radius disappeared on left and right spatial photos. I've tried .clipShape and .mask modifiers, but they did't work. How to clip or mask spatial photo with corner radius effect?

Hello, There are odd artifacts (one looks like an image placeholder) appearing when dismissing an immersive space which is displaying an ImagePresentationComponent. Both artifacts look like widgets.. See below our simple code displaying the ImagePresentationComponent and the images of the odd artifacts that appear briefly when dismissing the immersive space. import OSLog import RealityKit import SwiftUI struct ImmersiveImageView: View { let logger = Logger(subsystem: AppConstant.SUBSYSTEM, category: "ImmersiveImageView") @Environment(AppModel.self) private var appModel var body: some View { RealityView { content in if let currentMedia = appModel.currentMedia, var imagePresentationComponent = currentMedia.imagePresentationComponent { let imagePresentationComponentEntity = Entity() switch currentMedia.type { case .iphoneSpatialMovie: logger.info("\(#function) \(#line) spatial3DImmersive display for \(String(describing: currentMedia))") imagePresentationComponent.desiredViewingMode = .spatial3DImmersive case .twoD: logger.info("\(#function) \(#line) spatial3DImmersive display for \(String(describing: currentMedia))") imagePresentationComponent.desiredViewingMode = .spatial3DImmersive case .visionProConvertedSpatialPhoto: logger.info("\(#function) \(#line) spatialStereoImmersive display for \(String(describing: currentMedia))") imagePresentationComponent.desiredViewingMode = .spatialStereoImmersive default : logger.error("\(#function) \(#line) Unsupported media type \(currentMedia.type)") assertionFailure("Unsupported media type \(currentMedia.type)") } imagePresentationComponentEntity.components.set(imagePresentationComponent) imagePresentationComponentEntity.position = AppConstant.Position.spacialImagePosition content.add(imagePresentationComponentEntity) } let toggleViewAttachmentComponent = ViewAttachmentComponent(rootView: ToggleImmersiveSpaceButton()) let toggleViewAttachmentComponentEntity = Entity(components: toggleViewAttachmentComponent) toggleViewAttachmentComponentEntity.position = SIMD3<Float>( AppConstant.Position.spacialImagePosition.x + 1, AppConstant.Position.spacialImagePosition.y, AppConstant.Position.spacialImagePosition.z ) toggleViewAttachmentComponentEntity.scale = AppConstant.Scale.attachments content.add(toggleViewAttachmentComponentEntity) } } }

hi guys, I'm working in VFX industry and I've got the question that, is it possible to create immersive video directly from virtual scene created in DCC software like maya, rendered into footage, then coded into immersive video, and finally play in in vision pro? thanks.

Dear all, I´m using Unity 6.2 beta and Xcode 16.2. I´m creating a simple framework to use the text to speech functionality in VisionOS from unity. The framework is created in Swift. I create an objective-c wrapper with the following declarations: ... void _initTTS(int); ... I create the framework, import it in Unity and call the functions in a c# wrapper class. The code is as follows: public static class TTSPluginManager { [DllImport("TTS_Vision"] private static extern void _initTTS(int val); ... public static void Initialize() { #if UNITY_VISIONOS _initTTS(0); #else Debug.LogWarning("NativeTTS.Initialize called on a non-iOS platform. Ignoring."); #endif } } I have managed to compile and run the program in the Apple Vision Pro, but I keep on getting the following error: DllNotFoundException: TTS_Vision assembly: type: member:(null) TTSPluginManager.Initialize () (at Assets/Plugins/TTSPluginManager.cs:33) LecturePortalManager.OnCreateStory (Ink.Runtime.Story story) (at Assets/AVRLecture/LecturePortalManager.cs:17) InkLoader.StartStory () (at Assets/AVRLecture/InkLoader.cs:24) InkLoader.Start () (at Assets/AVRLecture/InkLoader.cs:18) If I run the generated code from Xcode, I can see the app in the AVP, but I keep getting a loading error: DllNotFoundException: Unable to load DLL 'TTS_Vision'. Tried the load the following dynamic libraries: Unable to load dynamic library '/TTS_Vision' because of 'Failed to open the requested dynamic library (0x06000000) dlerror() = dlopen(/TTS_Vision, 0x0005): tried: '/TTS_Vision' (no such file) at TTSPluginManager.Initialize () [0x00000] in <00000000000000000000000000000000>:0 at LecturePortalManager.OnCreateStory (Ink.Runtime.Story story) [0x00000] in <00000000000000000000000000000000>:0 I can see in the generated code that the framework (TTS_Vision) is there, but the path seems wrong. I've tried to add more options to the searched paths, with no success... Any hints or suggestions are much more appreciated.

I've got an Immersive scene that I want to be able to bring additional users into via SharePlay where each user would be able to see (and hopefully interact) with the Immersive scene. How does one implement that?

So with the new ManipulationComponent, we can choose "stay" and then if you drag it out of your volume, once you let go it will instantly disappear. We can "animate" it back to inside the volume, eg.: content.subscribe(to: ManipulationEvents.WillRelease.self) { event in Entity.animate( .easeInOut(duration: 1), body: { event.entity.position = [0, 0.2, 0] }, completion: {} ) }, Howeve,r for the duration that it travels outside of the volume it's invisible the whole time. In this apple video, it seems to be visible when dragging and when letting go, but perhaps that's not a volume they're dragging it out of? https://youtu.be/VtenPKrvPOU?si=y1zoZOs2IMyDzOm6&t=1748 Does anyone know how to keep the entity visible even when after letting the entity go while you animate it back towards inside of your volume?

let component = GestureComponent(DragGesture()) iOS: ☑️ visionOS: ❌ This bug from beta to public, please fix it.

Hello, I was wondering how I can initialize an ImageAnchoringSource using https://developer.apple.com/documentation/realitykit/anchoringcomponent/imageanchoringsource/init(_:) When I construct one using a URL, it doesn't seem to be tracked and I see in the following when I debug print the component: ▿ 0 : AnchoringComponent ▿ target : Target ▿ referenceImage : 1 element ▿ from : ImageAnchoringSource ▿ url : Optional<URL> ▿ some : file:///var/mobile/Containers/Data/Application/D1126EA0-A1D7-468F-A40C-8578B7F5BDDF/Library/Caches/CodeCache/0E457AA7-2195-48B9-9DD4-58CEB9397F69.png - _url : file:///var/mobile/Containers/Data/Application/D1126EA0-A1D7-468F-A40C-8578B7F5BDDF/Library/Caches/CodeCache/0E457AA7-2195-48B9-9DD4-58CEB9397F69.png - _parseInfo : nil - _baseParseInfo : nil - name : nil - group : nil ▿ trackingMode : TrackingMode - trackingMode : 2 Is there a specific format for the parseInfo? When I use the same image to make an image anchoring source by group and name in AR Resources, it is tracked. Thank you!

Hello, I am building a kiosk-style app for VisionOS which will be used in Guided Access mode, to be given to various visitors. So each of them will do hands + eyes setup, standard Guided Access thing. I want my experience to auto-start playing content when setup is done. I looked everywhere, but found no way do detect whether setup is complete? Also adding any kind of interface to start the app manually is risky, since buttons etc remain visible an interactable WHILE setup takes place. Delay-based approach also wont work, since setup can be skipped, or failed, or be done quickly, slowly... So it takes between 10 seconds and a few minutes. So the question is - is there any way to get notification, or check some bool or something that will tell me that Hands + Eyes setup in Guided mode is complete (or skipped)? Thanks in advance!

Hi, I’m wondering whether RealityKit has its own scene management system, since it uses ARView (backed by ARKit) to present AR content. Does RealityKit manage scenes independently, or does it rely entirely on ARKit’s scene handling? Thank you.

At a recent community meeting we were wondering how Apple creates this soft-edge effect around the occlusion cutouts. We see this effect on keyboard cutouts, iPhone cutouts, and in progressive spaces. An example: Notice the soft edged around the occlusion cutout for the keyboard One of our members created some Shader Graph materials to explore soft edges. These work by sending data into the opacity channel of the PreviewSurface node. Unfortunately, the Occlusion Surface nodes lack any sort of input. If you know how to blend these concepts with RealityKit Occlusion, please let us know!

I got more than 1 TB Immersive videos, and I want to play from them. Is there a way I can connect a ssd to Vision Pro via developer strap? Or is it possible to connect to a 10G Ethernet ad, and then using Ethernet to connect to a disk/NAS and attach the drive via ip?