Is there a way to check if DDM(Declarative Device Management) is enabled on a device?

Hi all, I'm implementing Intune MAM to secure applications on iOS. However, I need my users to be able to save files (e.g. attachments in an email in the Outlook app) to iOS Files. To do so, I'm trying to put Files in exception of my Intune MAM policy and I need to obtain the Files "CFBundleURLSchemes" value from the info.plist file of the Files app. I'm not able to get that information. Are any of you able to get that somehow? Thanks!

Hello, I’ve run into an issue with a configuration profile on my supervised iPhone. I’m wondering if anyone here might be able to help? The profile contains the allowListedAppBundleIDs key within the restrictions payload. My Apple Watch is paired with the iPhone. The iPhone was supervised manually with Apple Configurator, hence the Apple Watch has not been directly supervised itself. The profile works completely as expected when installed on the phone. As soon as the profile is installed on the iPhone, I can witness the apps on the Apple Watch rearrange themselves as some apps are hidden. So clearly the profile is applying its restrictions to the Apple Watch to some degree. My issue however is that apps listed in the whitelist are hidden from the Watch. The apps that are missing from my Watch are Walkie Talkie, Find My Items, Find My Friends, Messages, Alarm, Remote, Now Playing, Sleep, Meditation and Heart Rate. This is despite the following bundle IDs being listed in the whitelist array: com.apple.findmy.findpeople, com.apple.findmy.finddevices, com.apple.HeartRate, com.apple.SessionTrackerApp, com.apple.NanoWorldClock, com.apple.findmy.finditems, com.apple.Mind, com.apple.NanoOxygenSaturation, com.apple.watchmemojieditor com.apple.NanoSleep com.apple.NanoNowPlaying com.apple.noise com.apple.tincan com.apple.NanoRemote com.apple.NanoAlarm com.apple.private.NanoTimer com.apple.NanoStopwatch I’ve done some testing, but not sure what I’ve found really. I’ve so far identified 3 scenarios. Scenario 1: I have the whitelist profile installed on the iPhone. I download an app that appears in the whitelist from my watch (or at least its iPhone version does). The apps show up on the iPhone automatically and can be launched there. These apps cannot be launched on the watch. Scenario 2: I downloaded a few apps to my watch, that didn’t automatically install on my iPhone at the same time. They were on the whitelist. These ones couldn’t be launched from my Watch. I then downloaded them to the iPhone and they could be launched there (since they were on the whitelist). Scenario 3: A couple of 3rd party apps on the whitelist could be downloaded and launched from the watch with the whitelist installed. It seems as though there are different kinds of Apple Watch app and this is what I’ve read elsewhere. First of all there are Watch-only apps, which do not automatically install a companion iPhone app. Secondly there are companion apps, which when installed from the Watch App Store download their companion app to the iPhone in the background. Someone please correct me - I’m bound to be overlooking something here. So maybe the apps that when installed from Watch automatically install on iPhone and can only be launched from the iPhone have a separate bundle ID for their Watch app which I haven’t included? Apps that are on the whitelist AND do not automatically install an iPhone app AND can be launched from the Watch, include: solstice What3words So maybe these do not need a companion app, but have the same Bundle ID as their iPhone app? However, I’m still not sure why many stock Apple Watch apps are missing from the Watch…. The most obvious answer is that I’ve got their Bundle IDs wrong, but I don’t think I have given I extracted the bundle IDs from the App Store pages of the Apple WatchOS apps. I noticed at this Apple Support page (https://support.apple.com/en-gb/guide/deployment/dep34c5cd30f/1/web/1.0) that there is no mention of whitelisting or blacklisting apps on WatchOS using MDM, yet something definitely happens on the watch when the configuration profile is installed on the iPhone. Furthermore, if I tap on a configuration profile, which comprises a blacklist, on my iPhone it will ask me if I want to install it on the iPhone or Watch. The same pop-up question doesn’t happen when the profile contains a whitelist. All this to say, I’m massively confused as to why I can’t get this working. I’d really appreciate anyone’s advice which is bound to be expert. Thank you

Hello, I have a system, which is able to execute bash/zsh scripts on a set of machines. The default behaviour is that the signature of the script is checked on the machine, which is executing it, and in case if it is not signed properly, the system rejects the execution. An own certificate has to be created for signing the scripts, which means that the certificate has to be installed and marked as trusted on the target machines (which are executing the script). I've been using : "/usr/bin/security add-trusted-cert ..." command to install the certificate on the machines as trusted. Since macOS Big Sur, the above command was prompting the local user for admin credentials. To avoid this, Apple suggested to use the following command to temporarily disable and re-enable the confirmation dialog : 1.: /usr/bin/security authorizationdb write com.apple.trust-settings.admin allow 2.: /usr/bin/security authorizationdb write com.apple.trust-settings.admin admin Now with the release of macOS Sequoia, the above command : "/usr/bin/security authorizationdb write com.apple.trust-settings.admin allow" does not work any more. It gives the following output : NO (-60005) I have the following questions : 1.: Could you please suggest an alternative way for IT administrators to install certificates on their machines, without any user confirmation? 2.: Could you please suggest how the same could be achieved using a bash/zsh script? In which context could the above commands : "/usr/bin/security authorizationdb write com.apple.trust-settings.admin allow" and "/usr/bin/security authorizationdb write com.apple.trust-settings.admin admin" still work? Thank you for your help in advance!

There could be a case where-in multiple transparent proxies might exist in the system (for ex., Cisco AnyConnect, GlobalProtect, etc). We want to know if there is a way to order transparent proxies so that the desired transparent proxy gets the request first. During our research, we found a resource which talks about ordering transparent proxies through MDM. https://developer.apple.com/documentation/devicemanagement/vpn/transparentproxy Using this reference, we tried to create a profile and push it through JAMF. Below is the profile that we created and pushed with JAMF. Property List - <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>TransparentProxy</key> <array> <dict> <key>ProviderBundleIdentifier</key> <string>com.paloaltonetworks.GlobalProtect.client.extension</string> <key>Order</key> <string>1</string> </dict> <dict> <key>ProviderBundleIdentifier</key> <string>com.cisco.anyconnect.macos.acsockext</string> <key>Order</key> <string>2</string> </dict> <dict> <key>ProviderBundleIdentifier</key> <string>com.mydomain.transparentproxy</string> <key>Order</key> <string>3</string> </dict> </array> We are not sure if this is the right way to create the profile, though JAMF is not throwing any error while pushing this profile. We see this profile on the local machine as "/Library/Managed Preferences/com.apple.networking.vpn-transparent-list.plist". Is there a way to know if the profile took effect and the order of transparent proxies has changed. Thanks in advance.

On a supervised device running iOS 18 without any AirDrop restrictions applied, when a profile with allowListedAppBundleIDs restriction key is installed, the AirDrop sound plays. But still the accept prompt does not appear, making it impossible to accept files. The prompt works as expected on iOS 18 devices to which the allowListedAppBundleIDs restriction is not installed. This issue occurs only on supervised iOS 18 devices to which the allowListedAppBundleIDs restriction is being applied. Device must be in iOS 18 version > Install the (allowListedAppBundleIDs restriction) profile with the device > Try to AirDrop files to the managed device. The expected result is that the accept prompt must pop up but it does not appear. This issue is occurring irrespective of any Whitelisted bundle ID being added to the allowListedAppBundleIDs restriction profile. Have attached a few Whitelisted bundle ID here com.talentlms.talentlms.ios.beta, com.maxaccel.safetrack, com.manageengine.mdm.iosagent, com.apple.weather, com.apple.mobilenotes, gov.dot.phmsa.erg2, com.apple.calculator, com.manageengine.mdm.iosagent, com.apple.webapp, com.apple.CoreCDPUI.localSecretPrompt etc. Have raised a Feedback request (FB15709399) with sysdiagnose logs and a short video on the issue.

I have created a configuration profile which basically just turns off notifications for Shortcuts app but I am unable to install it on my iPhone as I am getting the following error “This profile can be installed on a supervised device only” can someone please help me with this? Would also appreciate if you have another way to turn off shortcuts notifications permanently since when I turn it off via screen time it keeps turning itself ON every couple of days.

I found that "search" endpoint is recently added to api.ent.apple.com : https://developer.apple.com/documentation/devicemanagement/get-catalog-search-results However it seems we cannot find custom apps using this API even with sToken. Is it not suppoted yet? Thank you

Why is MDM camera restriction designed not to work on the lock screen?

Hi,team: I need to distribute an mdm configuration file containing the "ServiceManagementManagedLoginItems" service to a large number of company-supervised computers, where com.apple.servicemanagement only supports macOS 13.0+. However, I cannot effectively distinguish whether the device system where the mdm configuration file needs to be installed is greater than 13. Can I directly install the mdm configuration file on all devices? Will installing the mdm configuration file on devices less than 13 have any impact on the system or other configuration items in mdm? The description link of ServiceManagementManagedLoginItems is: https://developer.apple.com/documentation/devicemanagement/servicemanagementmanagedloginitems

In the RequestRequiresNetworkTether property, the definition of “network-tethered” is unclear, and there seems to be a discrepancy between the actual behavior and the description in the documentation. We would like to clarify the definition of the connection state that “network-tethered” means and the specific behavior requirements when the property is set to true. Explanation of the document The description “If true, the device must be network-tethered to run the command. I was not sure whether it refers to “network connection” or “tethered communication” as the Japanese translation. Actual operation verification results The error message was “The device is not tethered. (MDMErrorDomain:12081)”. Error occurs when only carrier communication is used The following connection conditions work normally (as in the case of false) Wifi communication Combination of carrier communication and Wifi communication Tethering communication Combination of carrier communication and tethering communication Tethering connection (both parent and child devices) Inconsistencies Although the document description could be interpreted as a simple network connection requirement, actual operation is limited only to carrier communications alone Error message uses language regarding tethering, but actual tethering connection works fine

I found a new Payload attribute LegacyAppConfigAssetReference in AppManaged introduced in iOs 18.4 beta. So I tried it, however no configuration is discoverted in the installed app. -- configuration { "Identifier": "8c2af0b6-5ae0-5927-a1cd-bab5e4148bb8", "Type": "com.apple.configuration.app.managed", "Payload": { "InstallBehavior": { "Install": "Required", "License": { "Assignment": "Device", "VPPType": "Device" } }, "AppStoreID": "535886823", "LegacyAppConfigAssetReference": "ac35558f-aefc-5faf-8f64-1faaff993b96" }, "ServerToken": "2abdc89492d89ca1a213ca61318ae0651c2b8de660c2847a44a3fb8ad9d9a8ad" } -- declaration/asset/ac35558f-aefc-5faf-8f64-1faaff993b96 { "Identifier": "ac35558f-aefc-5faf-8f64-1faaff993b96", "Type": "com.apple.asset.data", "Payload": { "Reference": { "DataURL": "https://i3-oreore-ios-mdm.azurewebsites.net/asset_files/eyJpZCI6IjNkOTg2YWVjNzQ1MWJiYWZlZjJmZGU1NmZmYmJlYjdkLnBsaXN0Iiwic3RvcmFnZSI6InN0b3JlIiwibWV0YWRhdGEiOnsiZmlsZW5hbWUiOiJFbmNvZGVkQ2hyb21lUG9saWN5RXhhbXBsZS5wbGlzdCIsInNpemUiOjMyMjUsIm1pbWVfdHlwZSI6ImFwcGxpY2F0aW9uL29jdGV0LXN0cmVhbSJ9fQ", "ContentType": "application/plist" } }, "ServerToken": "7433f7c0c991a1943636ff7bd8949e88738c684ecbde347ac8a9c5b5c19dda14" } -- And the data type of the managed app configuration is application/plist http https://i3-oreore-ios-mdm.azurewebsites.net/asset_files/eyJpZCI6IjNkOTg2YWVjNzQ1MWJiYWZlZjJmZGU1NmZmYmJlYjdkLnBsaXN0Iiwic3RvcmFnZSI6InN0b3JlIiwibWV0YWRhdGEiOnsiZmlsZW5hbWUiOiJFbmNvZGVkQ2hyb21lUG9saWN5RXhhbXBsZS5wbGlzdCIsInNpemUiOjMyMjUsIm1pbWVfdHlwZSI6ImFwcGxpY2F0aW9uL29jdGV0LXN0cmVhbSJ9fQ HTTP/1.1 200 OK Accept-Ranges: bytes Cache-Control: max-age=31536000 Content-Length: 3225 Content-Type: application/plist Date: Tue, 18 Mar 2025 22:59:40 GMT X-Content-Type-Options: nosniff <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC '-//Apple//DTD PLIST 1.0//EN' 'http://www.apple.com/DTDs/PropertyList-1.0.dtd'> <plist version="1.0"> <dict> <key>EncodedChromePolicy</key> <string>PD94bWwgdmVyc2lvbj0iMS4wIiA/PjwhRE9DVFlQRSBwbGlzdCAgUFVCTElDICctLy9BcHBsZS8vRFREIFBMSVNUIDEuMC8vRU4nICAnaHR0cDovL3d3dy5hcHBsZS5jb20vRFREcy9Qcm9wZXJ0eUxpc3QtMS4wLmR0ZCc+PHBsaXN0IHZlcnNpb249IjEuMCI+PGRpY3Q+PGtleT5BdXRvRmlsbEVuYWJsZWQ8L2tleT48ZmFsc2UvPjxrZXk+Q29va2llc0FsbG93ZWRGb3JVcmxzPC9rZXk+PGFycmF5PjxzdHJpbmc+aHR0cDovL3d3dy5leGFtcGxlLmNvbTwvc3RyaW5nPjxzdHJpbmc+WyouXWV4YW1wbGUuZWR1PC9zdHJpbmc+PC9hcnJheT48a2V5PkNvb2tpZXNCbG9ja2VkRm9yVXJsczwva2V5PjxhcnJheT48c3RyaW5nPmh0dHA6Ly93d3cuZXhhbXBsZS5jb208L3N0cmluZz48c3RyaW5nPlsqLl1leGFtcGxlLmVkdTwvc3RyaW5nPjwvYXJyYXk+PGtleT5Db29raWVzU2Vzc2lvbk9ubHlGb3JVcmxzPC9rZXk+PGFycmF5PjxzdHJpbmc+aHR0cDovL3d3dy5leGFtcGxlLmNvbTwvc3RyaW5nPjxzdHJpbmc+WyouXWV4YW1wbGUuZWR1PC9zdHJpbmc+PC9hcnJheT48a2V5PkRlZmF1bHRDb29raWVzU2V0dGluZzwva2V5PjxpbnRlZ2VyPjE8L2ludGVnZXI+PGtleT5EZWZhdWx0UG9wdXBzU2V0dGluZzwva2V5PjxpbnRlZ2VyPjE8L2ludGVnZXI+PGtleT5EZWZhdWx0U2VhcmNoUHJvdmlkZXJFbmFibGVkPC9rZXk+PHRydWUvPjxrZXk+RGVmYXVsdFNlYXJjaFByb3ZpZGVyS2V5d29yZDwva2V5PjxzdHJpbmc+bWlzPC9zdHJpbmc+PGtleT5EZWZhdWx0U2VhcmNoUHJvdmlkZXJOYW1lPC9rZXk+PHN0cmluZz5NeSBJbnRyYW5ldCBTZWFyY2g8L3N0cmluZz48a2V5PkRlZmF1bHRTZWFyY2hQcm92aWRlclNlYXJjaFVSTDwva2V5PjxzdHJpbmc+aHR0cDovL3NlYXJjaC5teS5jb21wYW55L3NlYXJjaD9xPXtzZWFyY2hUZXJtc308L3N0cmluZz48a2V5Pk1hbmFnZWRCb29rbWFya3M8L2tleT48YXJyYXk+PGRpY3Q+PGtleT5uYW1lPC9rZXk+PHN0cmluZz5Hb29nbGU8L3N0cmluZz48a2V5PnVybDwva2V5PjxzdHJpbmc+Z29vZ2xlLmNvbTwvc3RyaW5nPjwvZGljdD48ZGljdD48a2V5Pm5hbWU8L2tleT48c3RyaW5nPllvdXR1YmU8L3N0cmluZz48a2V5PnVybDwva2V5PjxzdHJpbmc+eW91dHViZS5jb208L3N0cmluZz48L2RpY3Q+PC9hcnJheT48a2V5PlBhc3N3b3JkTWFuYWdlckVuYWJsZWQ8L2tleT48dHJ1ZS8+PGtleT5Qb3B1cHNBbGxvd2VkRm9yVXJsczwva2V5PjxhcnJheT48c3RyaW5nPmh0dHA6Ly93d3cuZXhhbXBsZS5jb208L3N0cmluZz48c3RyaW5nPlsqLl1leGFtcGxlLmVkdTwvc3RyaW5nPjwvYXJyYXk+PGtleT5Qb3B1cHNCbG9ja2VkRm9yVXJsczwva2V5PjxhcnJheT48c3RyaW5nPmh0dHA6Ly93d3cuZXhhbXBsZS5jb208L3N0cmluZz48c3RyaW5nPlsqLl1leGFtcGxlLmVkdTwvc3RyaW5nPjwvYXJyYXk+PGtleT5Qcm94eUJ5cGFzc0xpc3Q8L2tleT48c3RyaW5nPmh0dHA6Ly93d3cuZXhhbXBsZTEuY29tLGh0dHA6Ly93d3cuZXhhbXBsZTIuY29tLGh0dHA6Ly9pbnRlcm5hbHNpdGUvPC9zdHJpbmc+PGtleT5Qcm94eU1vZGU8L2tleT48c3RyaW5nPmRpcmVjdDwvc3RyaW5nPjxrZXk+UHJveHlQYWNVcmw8L2tleT48c3RyaW5nPmh0dHA6Ly9pbnRlcm5hbC5zaXRlL2V4YW1wbGUucGFjPC9zdHJpbmc+PGtleT5Qcm94eVNlcnZlcjwva2V5PjxzdHJpbmc+MTIzLjEyMy4xMjMuMTIzOjgwODA8L3N0cmluZz48a2V5PlNlYXJjaFN1Z2dlc3RFbmFibGVkPC9rZXk+PHRydWUvPjxrZXk+VHJhbnNsYXRlRW5hYmxlZDwva2V5Pjx0cnVlLz48a2V5PlVSTEJsYWNrbGlzdDwva2V5PjxhcnJheT48c3RyaW5nPmV4YW1wbGUuY29tPC9zdHJpbmc+PHN0cmluZz5odHRwczovL3NzbC5zZXJ2ZXIuY29tPC9zdHJpbmc+PHN0cmluZz5ob3N0aW5nLmNvbS9iYWRfcGF0aDwvc3RyaW5nPjxzdHJpbmc+aHR0cDovL3NlcnZlcjo4MDgwL3BhdGg8L3N0cmluZz48c3RyaW5nPi5leGFjdC5ob3N0bmFtZS5jb208L3N0cmluZz48L2FycmF5PjxrZXk+VVJMV2hpdGVsaXN0PC9rZXk+PGFycmF5PjxzdHJpbmc+ZXhhbXBsZS5jb208L3N0cmluZz48c3RyaW5nPmh0dHBzOi8vc3NsLnNlcnZlci5jb208L3N0cmluZz48c3RyaW5nPmhvc3RpbmcuY29tL2JhZF9wYXRoPC9zdHJpbmc+PHN0cmluZz5odHRwOi8vc2VydmVyOjgwODAvcGF0aDwvc3RyaW5nPjxzdHJpbmc+LmV4YWN0Lmhvc3RuYW1lLmNvbTwvc3RyaW5nPjwvYXJyYXk+PC9kaWN0PjwvcGxpc3Q+</string> </dict> </plist> Please note that this example plist is the same content as is described here: https://www.chromium.org/administrators/ios-mdm-policy-format/ After applying the declaration, the app GoogleChrome is successfully installed but no managed app configuration seems applied. MDMAppManagement.plist in the sysdiagnose is like below: plutil -p logs/MCState/Shared/MDMAppManagement.plist { "metadataByBundleID" => { "com.google.chrome.ios" => { "Attributes" => { "Removable" => 0 } "flags" => 1 "source" => "Declarative Device Management" "state" => 7 } "com.microsoft.skype.teams" => { "Attributes" => { "Removable" => 0 } "flags" => 1 "source" => "Declarative Device Management" "state" => 7 } } } I also tried with our private apps and not applied... How can we use this feature or check the configuration is applied? Thank you,

VPP API v2 returns 9609 "Unable to find the registered user." when I disassociate assets from an existing user. Repro step: 1. Create user POST https://vpp.itunes.apple.com/mdm/v2/users/create { "users": [ { "clientUserId": "client-1", "managedAppleId": "valid managed apple id" } ] } => user is associated 2. Retire user POST https://vpp.itunes.apple.com/mdm/v2/users/retire { "users": [ { "clientUserId": "client-1" } ] } => user is retired 3. Recreate user with the same clientUserId POST https://vpp.itunes.apple.com/mdm/v2/users/create { "users": [ { "clientUserId": "client-1", "managedAppleId": "valid managed apple id" } ] } => user is associated 4. Associate asset POST https://vpp.itunes.apple.com/mdm/v2/assets/associate { "assets": [ { "adamId": "408709785" } ], "clientUserIds": [ "client-1" ] } => asset associated 5. Disassociate asset POST https://vpp.itunes.apple.com/mdm/v2/assets/disassociate { "assets": [ { "adamId": "408709785" } ], "clientUserIds": [ "client-1" ] } => {"errorNumber":9609,"errorMessage":"Unable to find the registered user."} Notes associate API works fine with the same payload. disassociate work with v1 API.

Hello, I am currently attempting to use declarative management to install enterprise application, however I am running into errors. Initially the device was failing to unpac the initial manifest it downloaded. After pulling logs from the device it was revealed that the manifest must include the bundle-version for it to parse as valid. Adding this has allowed for the ipa to be fetched from the server however there is a secondary issue. The application is on the device but is unable to be opened due to the device being unable to validate its integreti. Any additional information would be useful. For completion the working manifest will be pasted below. It should be noted that the manifest below does work when requesting application installs through MDM commands. <***> <items type="array"> <dict> <assets type="array"> <dict> <kind type="string">software-package</kind> <url type="string">https://domain/web/mdm/ios/enterpriseipa/bundle.id</url> </dict> </assets> <key type="dict" name="metadata"> <bundle-identifier type="string">bundle.id</bundle-identifier> <kind type="string">software</kind> <subtitle type="string">app</subtitle> <title type="string">app</title> <bundle-version type="string">x.x.x</bundle-version> </key> </dict> </items> </***> </plist>

Hello Developers, We are encountering a consistent Kernel Panic issue on an iPhone device after sending a "Clear Passcode" command via our MDM solution. We're looking for insights or confirmation if others have experienced similar behavior. Device & Environment Details: Device: iPhone13,2 (iPhone 12 Pro) OS Version: iPhone OS 18.3.2 (Build 22D82) (Please note this appears to be a future/beta build identifier) Action Triggering Panic: Sending MDM ClearPasscode command. Roots Installed: 0 (Device is not jailbroken) Incident ID: 4B41C0AE-EE93-4051-BEE4-AB98438C10F0 Panic Log Summary: The kernel panic log clearly indicates the issue originates from the Secure Enclave Processor (SEP). The key panic string is: panic(cpu 3 caller 0xfffffff02357bc1c): SEP Panic: :sks /sks : 0x1000b15fc 0x0003ad60 0x0003ad44 0x100028698 0x10002cae4 0x10002a908 0x10002bc10 0x100045330 [hgggrhlvs] Panic app vers: 1827.80.10 Panic app UUID: 4C066E88-EB93-33C3-BCA7-C5F5474831CC ... Root task vers: AppleSEPOS-2772.80.2 Root task UUID: A39D6C5D-D07D-33EE-85A3-9105A8D93CE2 ... sks /sks 0x329cc/0x326e0/0x1314131413141314 ert/BOOT Use code with caution. The SEP Panic and reference to :sks /sks strongly suggest an issue within the Secure Key Store subsystem of the SEP. The panic occurred on CPU core 3. The kernel backtrace points to the com.apple.driver.AppleSEPManager kernel extension as the immediate caller in the main kernel that initiated the panic process after receiving the signal from the SEP. Analysis/Interpretation: Based on the log, it appears that the MDM ClearPasscode command, which necessarily interacts with the SEP's Secure Key Store via the AppleSEPManager driver, triggered an internal fault or bug within the SEP firmware (AppleSEPOS). This SEP-level panic subsequently caused the main iOS kernel to panic. Questions: Has anyone else encountered similar SEP panics, specifically involving the SKS subsystem, particularly after issuing MDM commands like ClearPasscode on iOS 18.x builds (especially 18.3.2 / 22D82)? Is this a known issue in this specific iOS/SEP firmware version? Are there any suggested workarounds for clearing passcodes via MDM on affected devices/OS versions, or any further diagnostic steps recommended? We appreciate any insights or shared experiences the community might have on this issue. Thank you.

Hello All, I am currently attempting to get application config working with enterprise apps but it seems as though the asset config is not applying at all. While the asset and application install correctly it does not seem that the config is read at all judging from the status message returned. "StatusItems" : { "app" : { "managed" : { "list" : [ { "name" : "apps", "config-state" : { "app-config-state" : { "state" : "unknown" } }, "identifier" : "app.identifier", "version" : "3.2", "short-version" : "3.2.0", "state" : "managed", "declaration-identifier" : "dec-identifier" } ] } } }, "Errors" : [ ] } The asset file being sent down is as follows: <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Config 1</key> <string>Value 1</string> <key>Config 2</key> <string>Value 2</string> <key>Config 3</key> <string>Value 3</string> </dict> </plist> This is the config report being sent back by the device after everything has been fetched: "StatusItems" : { "management" : { "declarations" : { "activations" : [ { "active" : true, "identifier" : "group.activation.payload", "valid" : "valid", "server-token" : "56792E4AE25C3286640B45E6BD265AE97545B2B87F90A6355919FD8B2E3C3AB3" } ], "configurations" : [ { "active" : true, "identifier" : "app.install", "valid" : "valid", "server-token" : "34D7ACECAE16EE9EEAC0630FF2FF85524FFBB5BA3CB18CFB6296FBC860368C85" }, { "active" : true, "identifier" : "ios.policy.subscription.list", "valid" : "valid", "server-token" : "376913E11BE7D26EC745B3B68C6FA94C4FC061B1B736D143EBE0F12FF73ADFF8" } ], "assets" : [ { "active" : true, "identifier" : "app.config.reference", "valid" : "valid", "server-token" : "1CFBE30EB56309005F742D667B80242E6A3CDC08ED228D0BC5F87749C6BBAB77" } ], "management" : [ ] } }, "app" : { "managed" : { "list" : [ { "state" : "downloading", "declaration-identifier" : "app.install", "identifier" : "app.identifier", "name" : "apps", "config-state" : { "app-config-state" : { "state" : "unknown" } } } ] } } }, "Errors" : [ ] } Additional info would be useful, though a sysdiagnosis will be submitted to feedback as well. Config did apply correctly when sending down through Install application command

Hi, Is there a method to hide individual items in System Settings that is not Deprecated? It needs some of the settings set and hidden for the end user. I found the DisabledSystemSettings key however it is marked as Deprecated and does not include all the new items, especially those related to Apple Intelligence. Is there any method other than “Restrictions” that does not hide and only set individual settings ? It needs to hide items in system settings :)

Hi. I am writing a little MDM application. Despite the basic task (add a password for 'remove profile' button in settings), it seems I am stuck with a problem: When I try to enroll my device with enrollment.mobileconfig file, Apple Configurator app, I receive an error The profile “Enrollment Profile” could not be installed because it is invalid. Make sure the profile is valid and try installing it again. The original architecture of my .mobileconfig contains of two payloads (com.apple.security.scep , com.apple.mdm), and it works correctly. However, when I try to add a third payload of com.apple.profileRemovalPassword , I receive the error stated above. From logs collected on iPhone, here's what was found : Failed to parse profile data. Error: NSError: Desc : The profile “Enrollment Profile” is invalid. Sugg : A profile containing an MDM payload must be removable. US Desc: The profile “Enrollment Profile” is invalid. US Sugg: A profile containing an MDM payload must be removable. Domain : MCProfileErrorDomain Code : 1000 Type : MCFatalError Params : ( "Enrollment Profile" ) ...Underlying error: NSError: Desc : A profile containing an MDM payload must be removable. US Desc: A profile containing an MDM payload must be removable. Domain : MCProfileErrorDomain Code : 1000 Type : MCFatalError Extra info: { isPrimary = 1; } My main dictionary contains HasRemovalPasscode Also, I have tried playing around with PayloadRemovalDisallowed setting it to true and false, however, I keep getting the same error message. There is also a second error produced: Profile MCConfigurationProfile, version 1: Display Name: “Enrollment Profile” Description : “***” Identifier : *** UUID : *** Organization: *** Is Stub : No Locked : Yes Removal passcode present Encrypted : No Trusted : 0 Signed : No Device Type : 0 Payloads: Payload MCSCEPPayload, version 1 Description : “***” Identifier : *** UUID : *** Type : com.apple.security.scep Display name: *** Organization: *** Payload MCMDMPayload, version 1 Description : “***” Identifier : *** UUID : *** Type : com.apple.mdm Organization: *** Payload MCRemovalPasswordPayload, version 1 Identifier : com.examp Can't parse profile: <decode: missing data> The code for com.apple.profileRemovalPassword is taken from apple documentation (https://developer.apple.com/documentation/devicemanagement/profileremovalpassword) I have also tried the automatic way - creating it from Apple Configurator, so it is correct in terms of syntax 100%. Several important notes: Creating a fresh new profile with just password removal protection single payload allows to perform a download of the profile If I comment out the whole com.apple.mdm payload block, I will be able to download this profile on iPhone also The com.apple.mdm block is also valid by itself, and works correctly I have tried implementing other types of "dummy" payloads - for example com.apple.dock <dict> <key>PayloadType</key> <string>com.apple.dock</string> <key>PayloadVersion</key> <integer>1</integer> <key>PayloadIdentifier</key> <string>com.example.test.dock</string> <key>PayloadUUID</key> <string>22222222-3333-4444-5555-666666666666</string> <key>PersistentApps</key> <array/> </dict> And everything worked out fine. So my hypothetical conclusion out of these four notes might be in some type of interconnection between mdm and profileRemovalPassword, which isn't really listed anywhere? Or am I missing something ? Thank you in advance.

We are experiencing a lot of problems deploying an enterprise app for in-house use since late January. All our iPads are managed by an MDM solution. It can take 10 or more attempts to successfully deploy the app. The deployment usually fails with the message "ASDErrorDomain error 854" among other messages. The company providing the MDM solution has no idea what causes this message or what it means. I suspect the error message is not generated by the MDM solutiion but rather gets passed through from iOS. After many attempts the installation may succeed suddenly, though, and the apps works as expected, but this may take weeks. I have not done any changes to my development system. 'I am running XCode 15.3 with SDK version 17.4, the iPads are on iOS 18.3

We are trying to develop an app that will be responsible for managing 5000+ managed iPads through Intune MDM. The user flow is to have a device locked to a single app when a user is not logged in, but to make the device available to other apps once a user is authenticated. We already tried UIAccessibility GuidedAccess Mode and autonomous single app mode but those were not sufficient due to our need to be able to toggle this from the background. When the device may be asleep. So another way we could achieve this functionality would be to control all app access under a launching mechanism. That way we could allow one app to be visible in our MDM configuration and try to access our business app through that using deep links. If this were to work, we would have to be able to hide an app and still make it launchable from the manager. Any ideas? Thanks