This issue has cropped up many times here on DevForums. Someone recently opened a DTS tech support incident about it, and I used that as an opportunity to post a definitive response here. If you have questions or comments about this, start a new thread and tag it with Network so that I see it. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" iOS Network Signal Strength The iOS SDK has no general-purpose API that returns Wi-Fi or cellular signal strength in real time. Given that this has been the case for more than 10 years, it’s safe to assume that it’s not an accidental omission but a deliberate design choice. For information about the Wi-Fi APIs that are available on iOS, see TN3111 iOS Wi-Fi API overview. Network performance Most folks who ask about this are trying to use the signal strength to estimate network performance. This is a technique that I specifically recommend against. That’s because it produces both false positives and false negatives: The network signal might be weak and yet your app has excellent connectivity. For example, an iOS device on stage at WWDC might have terrible WWAN and Wi-Fi signal but that doesn’t matter because it’s connected to the Ethernet. The network signal might be strong and yet your app has very poor connectivity. For example, if you’re on a train, Wi-Fi signal might be strong in each carriage but the overall connection to the Internet is poor because it’s provided by a single over-stretched WWAN. The only good way to determine whether connectivity is good is to run a network request and see how it performs. If you’re issuing a lot of requests, use the performance of those requests to build a running estimate of how well the network is doing. Indeed, Apple practices what we preach here: This is exactly how HTTP Live Streaming works. Remember that network performance can change from moment to moment. The user’s train might enter or leave a tunnel, the user might step into a lift, and so on. If you build code to estimate the network performance, make sure it reacts to such changes. Keeping all of the above in mind, iOS 26 beta has two new APIs related to this issue: Network framework now offers a linkQuality property. See this post for my take on how to use this effectively. The WirelessInsights framework can notify you of anticipated WWAN condition changes. But what about this code I found on the ’net? Over the years various folks have used various unsupported techniques to get around this limitation. If you find code on the ’net that, say, uses KVC to read undocumented properties, or grovels through system logs, or walks the view hierarchy of the status bar, don’t use it. Such techniques are unsupported and, assuming they haven’t broken yet, are likely to break in the future. But what about Hotspot Helper? Hotspot Helper does have an API to read Wi-Fi signal strength, namely, the signalStrength property. However, this is not a general-purpose API. Like the rest of Hotspot Helper, this is tied to the specific use case for which it was designed. This value only updates in real time for networks that your hotspot helper is managing, as indicated by the isChosenHelper property. But what about MetricKit? MetricKit is so cool. Amongst other things, it supports the MXCellularConditionMetric payload, which holds a summary of the cellular conditions while your app was running. However, this is not a real-time signal strength value. But what if I’m working for a carrier? This post is about APIs in the iOS SDK. If you’re working for a carrier, discuss your requirements with your carrier’s contact at Apple. Revision History 2025-07-02 Updated to cover new features in the iOS 16 beta. Made other minor editorial changes. 2022-12-01 First posted.

Every now and again folks notice that Network framework seems to create an unexpected number of connections on the wire. This post explains why that happens and what you should do about it. If you have questions or comments, put them in a new thread here on the forums. Use the App & System Services > Networking topic area and the Network tag. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Understanding Also-Ran Connections Network framework implements the Happy Eyeballs algorithm. That might create more on-the-wire connections than you expect. There are two common places where folks notice this: When looking at a packet trace When implementing a listener Imagine that you’ve implemented a TCP server using NWListener and you connect to it from a client using NWConnection. In many situations there are multiple network paths between the client and the server. For example, on a local network there’s always at least two paths: the link-local IPv6 path and either an infrastructure IPv4 path or the link-local IPv4 path. When you start your NWConnection, Network framework’s Happy Eyeballs algorithm might [1] start a TCP connection for each of these paths. It then races those connections. The one that connects first is the ‘winner’, and Network framework uses that connection for your traffic. Once it has a winner, the other connections, the also-ran connections, are redundant, and Network framework just closes them. You can observe this behaviour on the client side by looking in the system log. Many Network framework log entries (subsystem com.apple.network) contain a connection identifier. For example C8 is the eighth connection started by this process. Each connection may have child connections (C8.1, C8.2, …) and grandchild connections (C8.1.1, C8.1.2, …), and so on. You’ll see state transitions for these child connections occurring in parallel. For example, the following log entries show that C8 is racing the connection of two grandchild connections, C8.1.1 and C8.1.2: type: debug time: 12:22:26.825331+0100 process: TestAlsoRanConnections subsystem: com.apple.network category: connection message: nw_socket_connect [C8.1.1:1] Calling connectx(…) type: debug time: 12:22:26.964150+0100 process: TestAlsoRanConnections subsystem: com.apple.network category: connection message: nw_socket_connect [C8.1.2:1] Calling connectx(…) Note For more information about accessing the system log, see Your Friend the System Log. You also see this on the server side, but in this case each connection is visible to your code. When you connect from the client, Network framework calls your listener’s new connection handler with multiple connections. One of those is the winning connection and you’ll receive traffic on it. The others are the also-ran connections, and they close promptly. IMPORTANT Depending on network conditions there may be no also-ran connections. Or there may be lots of them. If you want to test the also-ran connection case, use Network Link Conditioner to add a bunch of delay to your packets. You don’t need to write special code to handle also-ran connections. From the perspective of your listener, these are simply connections that open and then immediately close. There’s no difference between an also-ran connection and, say, a connection from a client that immediately crashes. Or a connection generated by someone doing a port scan. Your server must be resilient to such things. However, the presence of these also-ran connections can be confusing, especially if you’re just getting started with Network framework, and hence this post. [1] This is “might” because the exact behaviour depends on network conditions. More on that below.

General: Forums subtopic: App & System Services > Networking TN3151 Choosing the right networking API Networking Overview document — Despite the fact that this is in the archive, this is still really useful. TLS for App Developers forums post Choosing a Network Debugging Tool documentation WWDC 2019 Session 712 Advances in Networking, Part 1 — This explains the concept of constrained networking, which is Apple’s preferred solution to questions like How do I check whether I’m on Wi-Fi? TN3135 Low-level networking on watchOS TN3179 Understanding local network privacy Adapt to changing network conditions tech talk Understanding Also-Ran Connections forums post Extra-ordinary Networking forums post Foundation networking: Forums tags: Foundation, CFNetwork URL Loading System documentation — NSURLSession, or URLSession in Swift, is the recommended API for HTTP[S] on Apple platforms. Moving to Fewer, Larger Transfers forums post Testing Background Session Code forums post Network framework: Forums tag: Network Network framework documentation — Network framework is the recommended API for TCP, UDP, and QUIC on Apple platforms. Building a custom peer-to-peer protocol sample code (aka TicTacToe) Implementing netcat with Network Framework sample code (aka nwcat) Configuring a Wi-Fi accessory to join a network sample code Moving from Multipeer Connectivity to Network Framework forums post NWEndpoint History and Advice forums post Network Extension (including Wi-Fi on iOS): See Network Extension Resources Wi-Fi Fundamentals TN3111 iOS Wi-Fi API overview Wi-Fi Aware framework documentation Wi-Fi on macOS: Forums tag: Core WLAN Core WLAN framework documentation Wi-Fi Fundamentals Secure networking: Forums tags: Security Apple Platform Security support document Preventing Insecure Network Connections documentation — This is all about App Transport Security (ATS). WWDC 2017 Session 701 Your Apps and Evolving Network Security Standards [1] — This is generally interesting, but the section starting at 17:40 is, AFAIK, the best information from Apple about how certificate revocation works on modern systems. Available trusted root certificates for Apple operating systems support article Requirements for trusted certificates in iOS 13 and macOS 10.15 support article About upcoming limits on trusted certificates support article Apple’s Certificate Transparency policy support article What’s new for enterprise in iOS 18 support article — This discusses new key usage requirements. Technote 2232 HTTPS Server Trust Evaluation Technote 2326 Creating Certificates for TLS Testing QA1948 HTTPS and Test Servers Miscellaneous: More network-related forums tags: 5G, QUIC, Bonjour On FTP forums post Using the Multicast Networking Additional Capability forums post Investigating Network Latency Problems forums post WirelessInsights framework documentation iOS Network Signal Strength forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] This video is no longer available from Apple, but the URL should help you locate other sources of this info.

Hi all, I work on a smart product that, for setup, uses a captive portal to allow users to connect and configure the device. It emits a WiFi network and runs a captive portal - an HTTP server operates at 10.0.0.1, and a DNS server responds to all requests with 10.0.0.1 to direct "any and all" request to the server. When iOS devices connect, they send a request to captive.apple.com/hotspot-detect.html; if it returns success, that means they're on the internet; if not, the typical behavior in the past has been to assume you're connected to a captive portal and display what's being served. I serve any requests to /hotspot-detect.html with my captive portal page (index.html). This has worked reliably on iOS18 for a long time (user selects my products WiFi network, iOS detects portal and opens it). But almost everyone who's now trying with iOS26 is having the "automatic pop up" behavior fail - usually it says "Error opening page - Hotspot login cannot open the page because the network connection was lost." However, if opening safari and navigating to any URL (or 10.0.0.1) the portal loads - it's just the iOS auto-detect and open that's not working iOS18 always succeeds; iOS26 always fails. Anybody have any idea what changes may have been introduced in iOS26 on this front, or anything I can do to help prompt or coax iOS26 into loading the portal? It typically starts reading, but then stops mid-read.

Questions about FTP crop up from time-to-time here on DevForums. In most cases I write a general “don’t use FTP” response, but I don’t have time to go into all the details. I’ve created this post as a place to collect all of those details, so I can reference them in other threads. IMPORTANT Apple’s official position on FTP is: All our FTP APIs have been deprecated, and you should avoid using deprecated APIs. Apple has been slowly removing FTP support from the user-facing parts of our system. The most recent example of this is that we removed the ftp command-line tool in macOS 10.13. You should avoid the FTP protocol and look to adopt more modern alternatives. The rest of this post is an informational explanation of the overall FTP picture. This post is locked so I can keep it focused. If you have questions or comments, please do create a new thread in the App & System Services > Networking subtopic and I’ll respond there. Don’t Use FTP FTP is a very old and very crufty protocol. Certain things that seem obvious to us now — like being able to create a GUI client that reliably shows a directory listing in a platform-independent manner — aren’t possible to do in FTP. However, by far the biggest problem with FTP is that it provides no security [1]. Specifically, the FTP protocol: Provides no on-the-wire privacy, so anyone can see the data you transfer Provides no client-authenticates-server authentication, so you have no idea whether you’re talking to the right server Provides no data integrity, allowing an attacker to munge your data in transit Transfers user names and passwords in the clear Using FTP for anonymous downloads may be acceptable (see the explanation below) but most other uses of FTP are completely inappropriate for the modern Internet. IMPORTANT You should only use FTP for anonymous downloads if you have an independent way to check the integrity of the data you’ve downloaded. For example, if you’re downloading a software update, you could use code signing to check its integrity. If you don’t check the integrity of the data you’ve downloaded, an attacker could substitute a malicious download instead. This would be especially bad in, say, the software update case. These fundamental problems with the FTP protocol mean that it’s not a priority for Apple. This is reflected in the available APIs, which is the subject of the next section. FTP APIs Apple provides two FTP APIs: All Apple platforms provide FTP downloads via URLSession. Most Apple platforms (everything except watchOS) support CFFTPStream, which allows for directory listings, downloads, uploads, and directory creation. All of these FTP APIs are now deprecated: URLSession was deprecated for the purposes of FTP in the 2022 SDKs (macOS 13, iOS 16, iPadOS 16, tvOS 16, watchOS 9) [2]. CFFTPStream was deprecated in the 2016 SDKs (macOS 10.11, iOS 9, iPadOS 9, tvOS 9). CFFTPStream still works about as well as it ever did, which is not particularly well. Specifically: There is at least one known crashing bug (r. 35745763), albeit one that occurs quite infrequently. There are clear implementation limitations — like the fact that CFFTPCreateParsedResourceListing assumes a MacRoman text encoding (r. 7420589) — that won’t be fixed. If you’re looking for an example of how to use these APIs, check out SimpleFTPSample. Note This sample hasn’t been updated since 2013 and is unlikely to ever be updated given Apple’s position on FTP. The FTP support in URLSession has significant limitations: It only supports FTP downloads; there’s no support for uploads or any other FTP operations. It doesn’t support resumable FTP downloads [3]. It doesn’t work in background sessions. That prevents it from running FTP downloads in the background on iOS. It’s only supported in classic loading mode. See the usesClassicLoadingMode property and the doc comments in <Foundation/NSURLSession.h>. If Apple’s FTP APIs are insufficient for your needs, you’ll need to write or acquire your own FTP library. Before you do that, however, consider switching to an alternative protocol. After all, if you’re going to go to the trouble of importing a large FTP library into your code base, you might as well import a library for a better protocol. The next section discusses some options in this space. Alternative Protocols There are numerous better alternatives to FTP: HTTPS is by far the best alternative to FTP, offering good security, good APIs on Apple platforms, good server support, and good network compatibility. Implementing traditional FTP operations over HTTPS can be a bit tricky. One possible way forward is to enable DAV extensions on the server. FTPS is FTP over TLS (aka SSL). While FTPS adds security to the protocol, which is very important, it still inherits many of FTP’s other problems. Personally I try to avoid this protocol. SFTP is a file transfer protocol that’s completely unrelated to FTP. It runs over SSH, making it a great alternative in many of the ad hoc setups that traditionally use FTP. Apple doesn’t have an API for either FTPS or SFTP, although on macOS you may be able to make some headway by invoking the sftp command-line tool. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] In another thread someone asked me about FTP’s other problems, those not related to security, so let’s talk about that. One of FTP’s implicit design goals was to provide cross-platform support that exposes the target platform. You can think of FTP as being kinda like telnet. When you telnet from Unix to VMS, it doesn’t aim to abstract away VMS commands, so that you can type Unix commands at the VMS prompt. Rather, you’re expected to run VMS commands. FTP is (a bit) like that. This choice made sense back when the FTP protocol was invented. Folks were expecting to use FTP via a command-line client, so there was a human in the loop. If they ran a command and it produced VMS-like output, that was fine because they knew that they were FTPing into a VMS machine. However, most users today are using GUI clients, and this design choice makes it very hard to create a general GUI client for FTP. Let’s consider the simple problem of getting the contents of a directory. When you send an FTP LIST command, the server would historically run the platform native directory list command and pipe the results back to you. To create a GUI client you have to parse that data to extract the file names. Doing that is a serious challenge. Indeed, just the first step, working out the text encoding, is a challenge. Many FTP servers use UTF-8, but some use ISO-Latin-1, some use other standard encodings, some use Windows code pages, and so on. I say “historically” above because there have been various efforts to standardise this stuff, both in the RFCs and in individual server implementations. However, if you’re building a general client you can’t rely on these efforts. After all, the reason why folks continue to use FTP is because of it widespread support. [2] To quote the macOS 13 Ventura Release Notes: FTP is deprecated for URLSession and related APIs. Please adopt modern secure networking protocols such as HTTPS. (92623659) [3] Although you can implement resumable downloads using the lower-level CFFTPStream API, courtesy of the kCFStreamPropertyFTPFileTransferOffset property. Revision History 2025-10-06 Explained that URLSession only supports FTP in classic loading mode. Made other minor editorial changes. 2024-04-15 Added a footnote about FTP’s other problems. Made other minor editorial changes. 2022-08-09 Noted that the FTP support in URLSession is now deprecated. Made other minor editorial changes. 2021-04-06 Fixed the formatting. Fixed some links. 2018-02-23 First posted.

I'm using NERelayManager to set Relay configuration which all works perfectly fine. I then do a curl with the included domain and while I see QUIC connection succeeds with relay server and H3 request goes to the server, the connection gets abruptly closed by the client with "Software caused connection abort". Console has this information: default 09:43:04.459517-0700 curl nw_flow_connected [C1.1.1 192.168.4.197:4433 in_progress socket-flow (satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] Transport protocol connected (quic) default 09:43:04.459901-0700 curl [C1.1.1 192.168.4.197:4433 in_progress socket-flow (satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] event: flow:finish_transport @0.131s default 09:43:04.460745-0700 curl nw_flow_connected [C1.1.1 192.168.4.197:4433 in_progress socket-flow (satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] Joined protocol connected (http3) default 09:43:04.461049-0700 curl [C1.1.1 192.168.4.197:4433 in_progress socket-flow (satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] event: flow:finish_transport @0.133s default 09:43:04.465115-0700 curl [C2 E47A3A0C-7275-4F6B-AEDF-59077ABAE34B 192.168.4.197:4433 quic, multipath service: 1, tls, definite, attribution: developer] cancel default 09:43:04.465238-0700 curl [C2 E47A3A0C-7275-4F6B-AEDF-59077ABAE34B 192.168.4.197:4433 quic, multipath service: 1, tls, definite, attribution: developer] cancelled [C2 FCB1CFD1-4BF9-4E37-810E-81265D141087 192.168.4.139:53898<->192.168.4.197:4433] Connected Path: satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi Duration: 0.121s, QUIC @0.000s took 0.000s, TLS 1.3 took 0.111s bytes in/out: 2880/4322, packets in/out: 4/8, rtt: 0.074s, retransmitted bytes: 0, out-of-order bytes: 0 ecn packets sent/acked/marked/lost: 3/1/0/0 default 09:43:04.465975-0700 curl nw_flow_disconnected [C2 192.168.4.197:4433 cancelled multipath-socket-flow ((null))] Output protocol disconnected default 09:43:04.469189-0700 curl nw_endpoint_proxy_receive_report [C1.1 IPv4#124bdc4d:80 in_progress proxy (satisfied (Path is satisfied), interface: en0[802.11], ipv4, ipv6, dns, proxy, uses wifi)] Privacy proxy failed with error 53 ([C1.1.1] masque Proxy: http://192.168.4.197:4433) default 09:43:04.469289-0700 curl [C1.1.1 192.168.4.197:4433 failed socket-flow (satisfied (Path is satisfied), viable, interface: en0[802.11], ipv4, ipv6, dns, uses wifi)] event: flow:failed_connect @0.141s, error Software caused connection abort Relay server otherwise works fine with our QUIC MASQUE clients but not with built-in macOS MASQUE client. Anything I'm missing?

Hey there Are there any recommendations or guidance for apps on alternatives to certificate pinning to secure their device network traffic? I want to move away from the overhead and risk associated with rotating certificates when using leaf pinning. However, I also don't want people to be able to perform a MITM attack easily using something like Charles Proxy with a self‑signed certificate added to the trust store. My understanding is that an app cannot distinguish between user‑trusted certificates and system‑trusted certificates in the trust store, so it cannot block traffic that uses user‑trusted certificates.

HI, I am currently developing an app that utilizes Wi-Fi Aware. According to the Wi-Fi Aware framework examples and the WWDC25 session on Wi-Fi Aware, discovery is handled using DevicePairingView and DevicePicker from the DeviceDiscoveryUI module. However, these SwiftUI views present their connection UI modally when tapped. My app's design requires the ability to control the presentation of this UI programmatically, rather than relying on a user tap. While inspecting the DeviceDiscoveryUI module, I found DDDevicePairingViewController and DDDevicePickerViewController, which appear to be the UIViewController counterparts to the SwiftUI views. The initializer for DDDevicePairingViewController accepts a ListenerProvider, so it seems I can pass the same ListenerProvider instance that is used with the DevicePairingView. However, the initializer for DDDevicePickerViewController requires an NWBrowser.Descriptor, which seems incompatible with the parameters used for the SwiftUI DevicePicker. I have two main questions: (1) Can DDDevicePairingViewController and DDDevicePickerViewController be officially used for Wi-Fi Aware pairing? (2) Are there any plans to provide more customization or programmatic control over the DevicePairingView and DevicePicker (for example, allowing us to trigger their modal presentation programmatically)? Thank you.

Is Apple's Wi-Fi Aware certified by the Wi-Fi Alliance? Is there any non-compliance of Apple's Wi-Fi Aware with the Wi-Fi Alliance standards? Does Apple have a roadmap to switch AWDL to Wi-Fi Aware? Does Apple have plans to adopt Wi-Fi Aware in Mac computers?

Starting in iOS 26, two notable changes have been made to CallKit, LiveCommunicationKit, and the PushToTalk framework: As a diagnostic aid, we're introducing new dialogs to warn apps of voip push related issue, for example when they fail to report a call or when when voip push delivery stops. The specific details of that behavior are still being determined and are likely to change over time, however, the critical point here is that these alerts are only intended to help developers debug and improve their app. Because of that, they're specifically tied to development and TestFlight signed builds, so the alert dialogs will not appear for customers running app store builds. The existing termination/crashes will still occur, but the new warning alerts will not appear. As PushToTalk developers have previously been warned, the last unrestricted PushKit entitlement ("com.apple.developer.pushkit.unrestricted-voip.ptt") has been disabled in the iOS 26 SDK. ALL apps that link against the iOS 26 SDK which receive a voip push through PushKit and which fail to report a call to CallKit will be now be terminated by the system, as the API contract has long specified. __ Kevin Elliott DTS Engineer, CoreOS/Hardware

ios構成プロファイルの制限のallowCloudPrivateRelayのプライベートリレーの制御とRelayペイロードの機能は関係がありますか？ それとも別々の機能でしょうか？ ↓ s there a relationship between the private relay control in the iOS configuration profile restriction allowCloudPrivateRelay and the functionality of the Relay payload? Or are they separate features?

I'm developing an application using the accessory setup kit (BLE) on iOS 18+. An important aspect of the connection process is being able to find and choose the correct device. I noticed on iOS 18.2 that I was able to both scroll through the discovered accessories as well as view the advertised name. However, after upgrading to 18.7.2, only a single device is viewable and the advertised name is no longer available. Is there a trigger for this feature that I need to enable or was this "multiple discovery" feature removed? If so, why?

How often do we see control filter start and stop? I read somewhere that data filter is long lived and control Filter is short lived. When does the operating system kills the control filter process?

From time to time the subject of NECP grows up, both here on DevForums and in DTS cases. I’ve posted about this before but I wanted to collect those tidbits into single coherent post. If you have questions or comments, start a new thread in the App & System Services > Networking subtopic and tag it with Network Extension. That way I’ll be sure to see it go by. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" A Peek Behind the NECP Curtain NECP stands for Network Extension Control Protocol. It’s a subsystem within the Apple networking stack that controls which programs have access to which network interfaces. It’s vitally important to the Network Extension subsystem, hence the name, but it’s used in many different places. Indeed, a very familiar example of its use is the Settings > Mobile Data [1] user interface on iOS. NECP has no explicit API, although there are APIs that are offer some insight into its state. Continuing the Settings > Mobile Data example above, there is a little-known API, CTCellularData in the Core Telephony framework, that returns whether your app has access to WWAN. Despite having no API, NECP is still relevant to developers. The Settings > Mobile Data example is one place where it affects app developers but it’s most important for Network Extension (NE) developers. A key use case for NECP is to prevent VPN loops. When starting an NE provider, the system configures the NECP policy for the NE provider’s process to prevent it from using a VPN interface. This means that you can safely open a network connection inside your VPN provider without having to worry about its traffic being accidentally routed back to you. This is why, for example, an NE packet tunnel provider can use any networking API it wants, including BSD Sockets, to run its connection without fear of creating a VPN loop [1]. One place that NECP shows up regularly is the system log. Next time you see a system log entry like this: type: debug time: 15:02:54.817903+0000 process: Mail subsystem: com.apple.network category: connection message: nw_protocol_socket_set_necp_attributes [C723.1.1:1] setsockopt 39 SO_NECP_ATTRIBUTES … you’ll at least know what the necp means (-: Finally, a lot of NECP infrastructure is in the Darwin open source. As with all things in Darwin, it’s fine to poke around and see how your favourite feature works, but do not incorporate any information you find into your product. Stuff you uncover by looking in Darwin is not considered API. [1] Settings > Cellular Data if you speak American (-: [2] Network Extension providers can call the createTCPConnection(to:enableTLS:tlsParameters:delegate:) method to create an NWTCPConnection [3] that doesn’t run through the tunnel. You can use that if it’s convenient but you don’t need to use it. [3] NWTCPConnection is now deprecated, but there are non-deprecated equivalents. For the full story, see NWEndpoint History and Advice. Revision History 2025-12-12 Replaced “macOS networking stack” with “Apple networking stack” to avoid giving the impression that this is all about macOS. Added a link to NWEndpoint History and Advice. Made other minor editorial changes. 2023-02-27 First posted.

I've been able to run this sample project with the PIRServer. But the urls are still not blocked. https://developer.apple.com/documentation/networkextension/filtering-traffic-by-url https://github.com/apple/pir-service-example I got this on the log Received filter status change: <FilterStatus: 'running'>

Hi, We're receiving data via centralManager.centralManager.scanForPeripherals, with no options or filtering (for now), and in the func centralManager(_ central: CBCentralManager, didDiscover peripheral: CBPeripheral, advertisementData: [String : Any], rssi RSSI: NSNumber) callback, we get advertisementData for each bluetooth device found. But, I know one of my BLE devices is sending an Eddystone TLM payload, which generally is received into the kCBAdvDataServiceData part of the advertisementData dictionary, but, it doesn't show up. What is happening however (when comparing to other devices that do show that payload), is I've noticed the "isConnectable" part is false, and others have it true. Technically we're not "connecting" as such as we're simply reading passive advertisement data, but does that have any bearing on how CoreBluetooth decides to build up it's AdvertisementData response? Example (with serviceData; and I know this has Eddystone TLM) ["kCBAdvDataLocalName": FSC-BP105N, "kCBAdvDataRxPrimaryPHY": 1, "kCBAdvDataServiceUUIDs": <__NSArrayM 0x300b71f80>( FEAA, FEF5 ) , "kCBAdvDataTimestamp": 773270526.26279, "kCBAdvDataServiceData": { FFF0 = {length = 11, bytes = 0x36021892dc0d3015aeb164}; FEAA = {length = 14, bytes = 0x20000be680000339ffa229bbce8a}; }, "kCBAdvDataRxSecondaryPHY": 0, "kCBAdvDataIsConnectable": 1] Vs This also has Eddystone TLM configured ["kCBAdvDataLocalName": 100FA9FD-7000-1000, "kCBAdvDataIsConnectable": 0, "kCBAdvDataRxPrimaryPHY": 1, "kCBAdvDataRxSecondaryPHY": 0, "kCBAdvDataTimestamp": 773270918.97273] Any insight would be great to understand if the presence of other flags drive the exposure of ServiceData or not...

General: Forums subtopic: App & System Services > Networking DevForums tag: Network Extension Network Extension framework documentation Routing your VPN network traffic article Filtering traffic by URL sample code Filtering Network Traffic sample code TN3120 Expected use cases for Network Extension packet tunnel providers technote TN3134 Network Extension provider deployment technote TN3165 Packet Filter is not API technote Network Extension and VPN Glossary forums post Debugging a Network Extension Provider forums post Exporting a Developer ID Network Extension forums post Network Extension Framework Entitlements forums post Network Extension vs ad hoc techniques on macOS forums post Network Extension Provider Packaging forums post NWEndpoint History and Advice forums post Extra-ordinary Networking forums post Wi-Fi management: Wi-Fi Fundamentals forums post TN3111 iOS Wi-Fi API overview technote How to modernize your captive network developer news post iOS Network Signal Strength forums post See also Networking Resources. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"

For important background information, read Extra-ordinary Networking before reading this. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Network Interface APIs Most developers don’t need to interact directly with network interfaces. If you do, read this post for a summary of the APIs available to you. Before you read this, read Network Interface Concepts. Interface List The standard way to get a list of interfaces and their addresses is getifaddrs. To learn more about this API, see its man page. A network interface has four fundamental attributes: A set of flags — These are packed into a CUnsignedInt. The flags bits are declared in <net/if.h>, starting with IFF_UP. An interface type — See Network Interface Type, below. An interface index — Valid indexes are greater than 0. A BSD interface name. For example, an Ethernet interface might be called en0. The interface name is shared between multiple network interfaces running over a given hardware interface. For example, IPv4 and IPv6 running over that Ethernet interface will both have the name en0. WARNING BSD interface names are not considered API. There’s no guarantee, for example, that an iPhone’s Wi-Fi interface is en0. You can map between the last two using if_indextoname and if_nametoindex. See the if_indextoname man page for details. An interface may also have address information. If present, this always includes the interface address (ifa_addr) and the network mask (ifa_netmask). In addition: Broadcast-capable interfaces (IFF_BROADCAST) have a broadcast address (ifa_broadaddr, which is an alias for ifa_dstaddr). Point-to-point interfaces (IFF_POINTOPOINT) have a destination address (ifa_dstaddr). Calling getifaddrs from Swift is a bit tricky. For an example of this, see QSocket: Interfaces. IP Address List Once you have getifaddrs working, it’s relatively easy to manipulate the results to build a list of just IP addresses, a list of IP addresses for each interface, and so on. QSocket: Interfaces has some Swift snippets that show this. Interface List Updates The interface list can change over time. Hardware interfaces can be added and removed, network interfaces come up and go down, and their addresses can change. It’s best to avoid caching information from getifaddrs. If thats unavoidable, use the kNotifySCNetworkChange Darwin notification to update your cache. For information about registering for Darwin notifications, see the notify man page (in section 3). This notification just tells you that something has changed. It’s up to you to fetch the new interface list and adjust your cache accordingly. You’ll find that this notification is sometimes posted numerous times in rapid succession. To avoid unnecessary thrashing, debounce it. While the Darwin notification API is easy to call from Swift, Swift does not import kNotifySCNetworkChange. To fix that, define that value yourself, calling a C function to get the value: var kNotifySCNetworkChange: UnsafePointer<CChar> { networkChangeNotifyKey() } Here’s what that C function looks like: extern const char * networkChangeNotifyKey(void) { return kNotifySCNetworkChange; } Network Interface Type There are two ways to think about a network interface’s type. Historically there were a wide variety of weird and wonderful types of network interfaces. The following code gets this legacy value for a specific BSD interface name: func legacyTypeForInterfaceNamed(_ name: String) -> UInt8? { var addrList: UnsafeMutablePointer<ifaddrs>? = nil let err = getifaddrs(&addrList) // In theory we could check `errno` here but, honestly, what are gonna // do with that info? guard err >= 0, let first = addrList else { return nil } defer { freeifaddrs(addrList) } return sequence(first: first, next: { $0.pointee.ifa_next }) .compactMap { addr in guard let nameC = addr.pointee.ifa_name, name == String(cString: nameC), let sa = addr.pointee.ifa_addr, sa.pointee.sa_family == AF_LINK, let data = addr.pointee.ifa_data else { return nil } return data.assumingMemoryBound(to: if_data.self).pointee.ifi_type } .first } The values are defined in <net/if_types.h>, starting with IFT_OTHER. However, this value is rarely useful because many interfaces ‘look like’ Ethernet and thus have a type of IFT_ETHER. Network framework has the concept of an interface’s functional type. This is an indication of how the interface fits into the system. There are two ways to get an interface’s functional type: If you’re using Network framework and have an NWInterface value, get the type property. If not, call ioctl with a SIOCGIFFUNCTIONALTYPE request. The return values are defined in <net/if.h>, starting with IFRTYPE_FUNCTIONAL_UNKNOWN. Swift does not import SIOCGIFFUNCTIONALTYPE, so it’s best to write this code in a C: extern uint32_t functionalTypeForInterfaceNamed(const char * name) { int fd = socket(AF_INET, SOCK_DGRAM, 0); if (fd < 0) { return IFRTYPE_FUNCTIONAL_UNKNOWN; } struct ifreq ifr = {}; strlcpy(ifr.ifr_name, name, sizeof(ifr.ifr_name)); bool success = ioctl(fd, SIOCGIFFUNCTIONALTYPE, &ifr) >= 0; int junk = close(fd); assert(junk == 0); if ( ! success ) { return IFRTYPE_FUNCTIONAL_UNKNOWN; } return ifr.ifr_ifru.ifru_functional_type; } Finally, TN3158 Resolving Xcode 15 device connection issues documents the SIOCGIFDIRECTLINK flag as a specific way to identify the network interfaces uses by Xcode for device connection traffic. Revision History 2025-12-10 Added info about SIOCGIFDIRECTLINK. 2023-07-19 First posted.

Transport Layer Security (TLS) is the most important security protocol on the Internet today. Most notably, TLS puts the S into HTTPS, adding security to the otherwise insecure HTTP protocol. IMPORTANT TLS is the successor to the Secure Sockets Layer (SSL) protocol. SSL is no longer considered secure and it’s now rarely used in practice, although many folks still say SSL when they mean TLS. TLS is a complex protocol. Much of that complexity is hidden from app developers but there are places where it’s important to understand specific details of the protocol in order to meet your requirements. This post explains the fundamentals of TLS, concentrating on the issues that most often confuse app developers. Note The focus of this is TLS-PKI, where PKI stands for public key infrastructure. This is the standard TLS as deployed on the wider Internet. There’s another flavour of TLS, TLS-PSK, where PSK stands for pre-shared key. This has a variety of uses, but an Apple platforms we most commonly see it with local traffic, for example, to talk to a Wi-Fi based accessory. For more on how to use TLS, both TLS-PKI and TLS-PSK, in a local context, see TLS For Accessory Developers. Server Certificates For standard TLS to work the server must have a digital identity, that is, the combination of a certificate and the private key matching the public key embedded in that certificate. TLS Crypto Magic™ ensures that: The client gets a copy of the server’s certificate. The client knows that the server holds the private key matching the public key in that certificate. In a typical TLS handshake the server passes the client a list of certificates, where item 0 is the server’s certificate (the leaf certificate), item N is (optionally) the certificate of the certificate authority that ultimately issued that certificate (the root certificate), and items 1 through N-1 are any intermediate certificates required to build a cryptographic chain of trust from 0 to N. Note The cryptographic chain of trust is established by means of digital signatures. Certificate X in the chain is issued by certificate X+1. The owner of certificate X+1 uses their private key to digitally sign certificate X. The client verifies this signature using the public key embedded in certificate X+1. Eventually this chain terminates in a trusted anchor, that is, a certificate that the client trusts by default. Typically this anchor is a self-signed root certificate from a certificate authority. Note Item N is optional for reasons I’ll explain below. Also, the list of intermediate certificates may be empty (in the case where the root certificate directly issued the leaf certificate) but that’s uncommon for servers in the real world. Once the client gets the server’s certificate, it evaluates trust on that certificate to confirm that it’s talking to the right server. There are three levels of trust evaluation here: Basic X.509 trust evaluation checks that there’s a cryptographic chain of trust from the leaf through the intermediates to a trusted root certificate. The client has a set of trusted root certificates built in (these are from well-known certificate authorities, or CAs), and a site admin can add more via a configuration profile. This step also checks that none of the certificates have expired, and various other more technical criteria (like the Basic Constraints extension). Note This explains why the server does not have to include the root certificate in the list of certificates it passes to the client; the client has to have the root certificate installed if trust evaluation is to succeed. In addition, TLS trust evaluation (per RFC 2818) checks that the DNS name that you connected to matches the DNS name in the certificate. Specifically, the DNS name must be listed in the Subject Alternative Name extension. Note The Subject Alternative Name extension can also contain IP addresses, although that’s a much less well-trodden path. Also, historically it was common to accept DNS names in the Common Name element of the Subject but that is no longer the case on Apple platforms. App Transport Security (ATS) adds its own security checks. Basic X.509 and TLS trust evaluation are done for all TLS connections. ATS is only done on TLS connections made by URLSession and things layered on top URLSession (like WKWebView). In many situations you can override trust evaluation; for details, see Technote 2232 HTTPS Server Trust Evaluation). Such overrides can either tighten or loosen security. For example: You might tighten security by checking that the server certificate was issued by a specific CA. That way, if someone manages to convince a poorly-managed CA to issue them a certificate for your server, you can detect that and fail. You might loosen security by adding your own CA’s root certificate as a trusted anchor. IMPORTANT If you rely on loosened security you have to disable ATS. If you leave ATS enabled, it requires that the default server trust evaluation succeeds regardless of any customisations you do. Mutual TLS The previous section discusses server trust evaluation, which is required for all standard TLS connections. That process describes how the client decides whether to trust the server. Mutual TLS (mTLS) is the opposite of that, that is, it’s the process by which the server decides whether to trust the client. Note mTLS is commonly called client certificate authentication. I avoid that term because of the ongoing industry-wide confusion between certificates and digital identities. While it’s true that, in mTLS, the server authenticates the client certificate, to set this up on the client you need a digital identity, not a certificate. mTLS authentication is optional. The server must request a certificate from the client and the client may choose to supply one or not (although if the server requests a certificate and the client doesn’t supply one it’s likely that the server will then fail the connection). At the TLS protocol level this works much like it does with the server certificate. For the client to provide this certificate it must apply a digital identity, known as the client identity, to the connection. TLS Crypto Magic™ assures the server that, if it gets a certificate from the client, the client holds the private key associated with that certificate. Where things diverge is in trust evaluation. Trust evaluation of the client certificate is done on the server, and the server uses its own rules to decided whether to trust a specific client certificate. For example: Some servers do basic X.509 trust evaluation and then check that the chain of trust leads to one specific root certificate; that is, a client is trusted if it holds a digital identity whose certificate was issued by a specific CA. Some servers just check the certificate against a list of known trusted client certificates. When the client sends its certificate to the server it actually sends a list of certificates, much as I’ve described above for the server’s certificates. In many cases the client only needs to send item 0, that is, its leaf certificate. That’s because: The server already has the intermediate certificates required to build a chain of trust from that leaf to its root. There’s no point sending the root, as I discussed above in the context of server trust evaluation. However, there are no hard and fast rules here; the server does its client trust evaluation using its own internal logic, and it’s possible that this logic might require the client to present intermediates, or indeed present the root certificate even though it’s typically redundant. If you have problems with this, you’ll have to ask the folks running the server to explain its requirements. Note If you need to send additional certificates to the server, pass them to the certificates parameter of the method you use to create your URLCredential (typically init(identity:certificates:persistence:)). One thing that bears repeating is that trust evaluation of the client certificate is done on the server, not the client. The client doesn’t care whether the client certificate is trusted or not. Rather, it simply passes that certificate the server and it’s up to the server to make that decision. When a server requests a certificate from the client, it may supply a list of acceptable certificate authorities [1]. Safari uses this to filter the list of client identities it presents to the user. If you are building an HTTPS server and find that Safari doesn’t show the expected client identity, make sure you have this configured correctly. If you’re building an iOS app and want to implement a filter like Safari’s, get this list using: The distinguishedNames property, if you’re using URLSession The sec_protocol_metadata_access_distinguished_names routine, if you’re using Network framework [1] See the certificate_authorities field in Section 7.4.4 of RFC 5246, and equivalent features in other TLS versions. Self-Signed Certificates Self-signed certificates are an ongoing source of problems with TLS. There’s only one unequivocally correct place to use a self-signed certificate: the trusted anchor provided by a certificate authority. One place where a self-signed certificate might make sense is in a local environment, that is, securing a connection between peers without any centralised infrastructure. However, depending on the specific circumstances there may be a better option. TLS For Accessory Developers discusses this topic in detail. Finally, it’s common for folks to use self-signed certificates for testing. I’m not a fan of that approach. Rather, I recommend the approach described in QA1948 HTTPS and Test Servers. For advice on how to set that up using just your Mac, see TN2326 Creating Certificates for TLS Testing. TLS Standards RFC 6101 The Secure Sockets Layer (SSL) Protocol Version 3.0 (historic) RFC 2246 The TLS Protocol Version 1.0 RFC 4346 The Transport Layer Security (TLS) Protocol Version 1.1 RFC 5246 The Transport Layer Security (TLS) Protocol Version 1.2 RFC 8446 The Transport Layer Security (TLS) Protocol Version 1.3 RFC 4347 Datagram Transport Layer Security RFC 6347 Datagram Transport Layer Security Version 1.2 RFC 9147 The Datagram Transport Layer Security (DTLS) Protocol Version 1.3 Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Revision History: 2025-11-21 Clearly defined the terms TLS-PKI and TLS-PSK. 2024-03-19 Adopted the term mutual TLS in preference to client certificate authentication throughout, because the latter feeds into the ongoing certificate versus digital identity confusion. Defined the term client identity. Added the Self-Signed Certificates section. Made other minor editorial changes. 2023-02-28 Added an explanation mTLS acceptable certificate authorities. 2022-12-02 Added links to the DTLS RFCs. 2022-08-24 Added links to the TLS RFCs. Made other minor editorial changes. 2022-06-03 Added a link to TLS For Accessory Developers. 2021-02-26 Fixed the formatting. Clarified that ATS only applies to URLSession. Minor editorial changes. 2020-04-17 Updated the discussion of Subject Alternative Name to account for changes in the 2019 OS releases. Minor editorial updates. 2018-10-29 Minor editorial updates. 2016-11-11 First posted.

Sometimes when adding a VPN configuration, it just redirects to the Settings app and doesn’t continue with the rest of the configuration process like prompting for passcode. But it proceeds as normal after the 2nd or 3rd try. This issue is occurring on iOS 18.5 build 22F5068a but it has been a problem over several versions now. Feedback ID: FB17458055